|
Multimeter Accessories
Radio Frequency Probe RF241
Frequency Range: 100kHz to 650MHz. This RF probe is designed to operate
with 10 or 22Mohms input digital multimeters, extending the fre-quency sensitivity of a
standard multimeter up to 650MHz. Accu-racy is +/-1dB from 100kHz to 250MHz and +/-3dB
from 250MHz to 650MHz. Maximum input 50 volts RMS.
High Voltage Probes
- HV-231-10
- (for multimeters with 10M ohms input impedance)
- HV-231-22
- (for multimeters with 22M ohms input impedance) Both probes allow standard
multimeters to measure up to 40kVDC or peak AC to 100 Hz. Accuracy:
DC: +/- 1% (1kV-20kV) +/- 2% (20kV-40kV)
AC: +/- 5% (@50/60Hz)
AC Current Clamps
CT231
- A 1000/1 current transformer allows direct reading in amps when used with the 200mA AC
current range of a multimeter.
- CT232
- Large jaw clamp measures up to 1000 amps AC and to 1kHz using 1000 to 1 transformer.
Built-in operator protection diode is a standard feature.
- CT234A
- Medium jaw clamp measures up to 400A AC and to 1kHz using 1000 to 1 transformer. Jaw
fits bus bars up to 63mm (2 in.) wide.
- CT236
- Medium jaw clamp measures up to 500A AC using a 100:1 transformer. Uses voltage ranges
of multimeter.
-
AC/DC Current Probes CT235, CT237,
& CT238
The new line of Wavetek Meterman AC/DC current probes are safety designed
to measure current non-invasively from 5mA to 1000A peak with accuracies of 1%. Providing
a scaled voltage output, they may be used with a variety of measurement instruments:
analog or digital multimeters, dataloggers, chart recorders or power analysis instruments.
These probes offer twice the accuracy, a wider AC bandwidth, and are safety approved to
international IEC standards. The broad AC bandwidth and 1% accuracy enables the precise
measurements of complex waveforms distorted by harmonics or power line anomalies. Fast and
accurate analysis is thus possible. Sophisticated Hall Effect technology provides for
accurate current measurements, and the zero adjust feature allows the cancellation of
residual magnetic fields so DC accuracy is unaffected
Contact Rapid-Tech today
if you require any further information on
Wavetek Meterman products or require a catalogue.
For additional information or to order, call
Rapid-Tech
today
| 
