Rapid-Tech Equipment Logo Combo Kit Power Quality Recorder Power Quality Analyzer Multifunction Digital Multimeter

Nationwide - Call 1800 358 531 

Amprobe logo

ACD-10 TRMS-Plus
600 Amp Trms Clamp-On Meter


Amprobe's ACD-10 TRMS PLUS meter offers thinner jaws over standard clamp meters. Allowing access to tight measurement areas and still accommodating conductors up to 25mm. It also measures Capacitance and Frequency. Frequency is measured by either jaws or test leads.

 

ACD-10 TRMS-Plus 600 Amp Trms Clamp-On Meter

Features
  • TRMS Measurement
  • AC and DC Voltage to 600 Volts.
  • AC Current to 600 Amps.
  • Thin Jaws, only 10mm (0.4") thick.
  • Resistance to 40MΩ.
  • Continuity Buzzer.
  • Capacitance to 3000µF.
  • Frequency measurement.
  • In rush current.
  • Hold and Maximum reading functions.
  • Accommodates conductors up to 26mm (1.02") in diameter.
  • Auto ranging.
  • Auto power off.
  • Rubber over-molded case.
  • Overload protected.
  • Included Accessories: Test leads, battery installed, soft carrying pouch and users manual.

Safety Conformity

Specifications

AC Voltage

4.000V, 40.00V, 400.0V, 600V

DC Voltage

400.0mV, 4.000V, 40.00V, 400.0V, 600V

AC Current

40.00A, 400.0A, 600A

Resistance (with continuity buzzer)

0 to 400.0Ω, 4.000kΩ, 40.00kΩ, 400.0kΩ, 4.000MΩ, 40.00MΩ

Capacitance

500.0nF, 5.000μF, 50.00μF, 500.0μF, 3000μF

Frequency (using Jaw or test leads)

40 to 400Hz with Jaw,

10Hz to 100kHz with test leads

 

General Specifications

Display

3-3/4 digit 4000-count LCD display

Refresh Rate

Three scans per second nominal

Polarity

Automatic

Low Battery

Below 2.4V approx.

Power Supply

Coin battery, 3 Volt, IEC-CR2032

Special Feature

30ms Maximum Hold, Data Hold, Relative Zero mode

Jaw Opening

26mm maximum conductor diameter

Operating Temperature

0°C to 40°C

Relative humidity

<80% RH for temperatures up to 31°C

decreasing linearly to 50% at 40°C

Storage Temperature

-20C to 60C, <80% RH with battery removed

Size

190mm (L) x 63mm (W) x 32mm (D)

7.4" (L) x 2.5" (W) x 1.3" (D)

Weight

139g approx

Safety

Meets EN 61010-2-032, UL 61010B-2-032, IEC 61010-1 2nd Ed.,

EN 61010-1 2nd Ed., UL 61010-1 2nd Ed. CAT III 600Volts AC/DC,

Pollution degree: 2

 

Included Accessories

Set of Test Leads, battery installed, Users Manual and Soft Carrying pouch

 


Fluke | Hart | Reed | Yokogawa | EuroSMC | Kyoritsu | Megger | | Tenmars | Tektronix | Amprobe | CIE | Silvertronic |
 Site Map | Search | About Us | Contact Us

 

Rapid-Tech Equipment
ABN 79 883 184 102
1300 Ferntree Gully Road. Scoresby. Victoria 3179
P.O. Box 4243 Knox City Centre. Victoria 3152

Phone: +61 3 9763 3299     Fax: +61 3 9753 2132