Amprobe ACD-31P Power Quality Clamp Meter

	*Model ACD-31P*
	**Home > Amprobe Instruments > Clamp-On Meters >**

ACD-31P
Power Quality Clamp-Meter

This instrument combine the standard features of professional clamp-on meters, with full Power analyzing capabilities! Measure: Active (W), Reactive (VAR) and Apparent (VA) Powers along with dual display Power Factor readout. Increase measuring efficiency with an optional PC interface kit.

ACD-31P Power Quality Clamp-Meter

Features

TRMS sensing.
AutoVa - Auto Selection of AC Volts, DC Volts or AC Amps Measurement.
AC/DC Voltage up to 600V, AC Current up to 1000A.
Resistance Measurements.
Frequency Measurements.
Active (W), Reactive (VAR) and Apparent (VA) Power with Dual-display Power Factor readout, Temperature.
Optional PC interface capacity (RS-232 KIT2).
Audible continuity.
Auto Power Off.
Automatic Polarity.
Low Battery Indication.
Peak and Data Hold.
Large easy to read LCD display and backlight.
Accommodates conductors up to 45mm (1.77") in diameter.
Measurement Category CAT III 600V (AC/DC)

Safety Conformity

Specifications

True RMS	True RMS sensing
AC Voltage	600.0V
AC Voltage Basic Accuracy	±(0.5% of reading + 5 digits) at 50/60Hz
AC Current	40.0A, 400.0A, 1000A
AC Current Basic Accuracy	±(1.0% of reading + 5 digits) at 50/60Hz

DC Voltage	600.0V
DC Voltage Basic Accuracy	±(0.5% of reading + 5 digits)

Resistance	999.9 Ohms
Resistance Basic Accuracy	±(1.0% of reading + 6 digits)
Frequency	5.00Hz to 500Hz
Frequency Basis Accuracy	±(0.5% of reading + 4 digits)

Active Power (W)	0 to 600.0 kW
Active Power (W) Basic Accuracy	±(2.0% of rdg + 6 digits) at Harmonics Fund to 10th and PF>0.7
Reactive Power (VAR)	0 to 600.0 kVAR
Reactive Power (VAR) Basic Accuracy	±(2.0% of rdg + 6 digits) at Harmonics Fund to 10th and PF>0.7
Apparent Power (VA)	0 to 600.0 kVA
Apparent Power (VA) Basic Accuracy	±(2.0% of rdg + 6 digits) at Harmonics Fund to 10th

Power Factor	0.10 to 0.99
Power Factor Basic Accuracy	±3 digits at Harmonics Fund to 21st

Temperature	-50°C to 300°C (-58°F to 572°F)
Temperature Basic Accuracy	±(2.0% of Rdg + 3°C), ±(2.0% of Rdg + 6°F)

Sampling Rate	1 per second (Power Function)
Sampling Rate	4 per second (Voltage, ACA clamp-on, Hz and Temp Functions)
Polarity	Automatic
Low Battery	Below 2.4V approx.
Transient Protection	6.5kV (1.2/50μs surge)
Pollution	Degree 2
E.M.C.	Meets EN61326 (1997, 1998/A1), EN61000-4-2 (1995), and
	EN61000-4-3 (1996) an RF field of 3V/m:
	Specified Accuracy + 45 digits
	performance above 3V/m is not specified

General Specifications
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C, <80% R.H. (battery removed)
Power Supply	Standard 1.5V 'AAA' size (NEDA 24A or IEC LR03) battery x 2
Power Consumption	10mA typical (Voltage, ACA, Hz and Power Functions)
Power Consumption	4mA typical (HM and Temperature functions)
Size	224mm (L) x 78mm (W) x 40mm (D)
Weight	224g approx

Included Accessories
Users Manual, Batteries, Thermocouple, Carrying Case and Test Leads

Optional Accessory
RS-232 KIT2 Data recording System