|
| |
Model BDM35
 3 3/4 Digit,
Analogue & Digital Display,
Multifunction Benchtop DMM
- Voltage, Current, Resistance, Diode Test, Continuity
- 1MHz Frequency Counter
- Capacitance Meter
- Large LCD Digital and Analogue Bargraph Readout
- Auto and Manual Ranging
- Fused 2A and 20A Current Inputs
- Relative, Min/Max, Memory/Read, Data Hold Modes
- Optional Rechargeable Battery Pack
In addition to DC and AC voltage, current, and resistance, Model BDM35 provides
frequency and capacitance measurement, plus diode test, and audible continuity check.
Current measurement is to 20A and both the lower current and higher current inputs are
fully fused. Specific ranges are automatically selected or can be manually selected with
the RANGE button. When used with a thermocouple-to-mV converter, such as Wavetek Model
TC253, the TEMPERATURE button will activate a C annunciator on the display to avoid
operator confusion.
The BDM35 expands its multifunction capability by including many useful troubleshooting
features: Min/Max will record the highest or lowest reading taken; DATA HOLD freezes the
display for later viewing; RELATIVE(delta) MODE displays the difference between two
measurements and can also be used to zero test lead resistance; and Memory/Read records
the last measurement taken, even in a different function, for viewing later.
The meter's display is a 3 3/4 digit (4000 count) resolution, LCD type. Its 12.7mm (0.5
in.) high digits and annunciators for ranges and functions are easy to read and includes a
42-segment analogue bar graph.
The bench-top case provides full, 360 degree adjustable tilt-bail, skid-proof rubberpads,
and power cord storage to maximize its utility. Testlead set, power cord, and operator's
manual are included. An optional rechargeable battery pack (Option P/N BAT35) allows for
portability.
Model BDM40
4 1/2 Digit Display,
True RMS,
Benchtop DMM
- AC and DC Voltage, Current, Resistance and Diode Test
- High Accuracy, Basic VDC 0.03%
- 2A Fused and 20A Range
- Easy-to-read, 0.5 Inch LED Display
Bench testing of voltage, ohms, and amps is easy and precise with Wavetek's new
BDM40.
This 4 1/2 digit (20,000 counts) digital multimeter features true RMS (AC or AC+DC
coupling) measurement capabilities to assure accuracy regardless of the types of
waveforms.
The BDM40 features high resolution at a low cost, which makes it ideal for production
test, QA test, depot service, and university and school labs.
Measurement capabilities include voltage from 10uV to 1200VDC and to lOOOVAC, current from
10uA to 20A, and resistance from 10m ohms to 20M ohms Diode test is provided on the 2k
ohms range.
The interlocking push buttons on the front panel provide easy selection of functions and
ranges. Bold labels on the input jacks increase visibility and offer an added safety, as
does the fully fused 2A jack.
The BDM40's full 360 degrees adjustable tilt bail and LED display maximize readability for
most any bench application. Each meter comes with standard test leads, power cord, and
operator's manual. A full line of optional probes, current clamps, and test leads is
available to meet your application needs.
Model FG2A
 2MHz Function Generator
- Square, Triangle, Sine Waves, and TTL Pulse Output
- 0.2Hz to 2MHz
- Duty-Cycle Control
- VCF Input
- Variable/Output Attenuation to 60dB
- Variable DC Offset Control
- Signal Inversion
The FG2A offers high performance with numerous output functions by fast, easy push-button
selection of power, frequency range, and waveform. Standard outputs include both a TTL
pulse output and an adjustable amplitude, low impedance output of low distortion sine,
square, or triangle wave signals.
Duty-cycle control allows the 50% duty cycle of the signal to be changed to any desired
value. You can use this to produce short duration pulses in square wave mode, or sawtooth
signals (ramp) in triangle mode. The invert button allows you to change the polarity of
the output signal. You can also add a variable DC offset voltage to the signal.
The VCF input permits the frequency to be controlled by an external DC control voltage.
This capability is particularly useful for generating 1000:1 or 1:1000 sweep signals. Two
20dB attenuators allow easy adjustment of low output levels, and the 50 ohms output allows
the FG2A to directly drive low impedance devices at amplitudes up to IOV pk-pk.
The FG2A is housed in a stylish case that allows stacking, and has a cushion grip carrying
handle/tilt stand and a rear cord wrap.
Model FG3B
2MHz
Sweep/Function Generator
- Sine, Square, Triangle Waves, TTL, and CMOS Pulse Outputs
- 0.2Hz to 2MHz
- Linear or Logarithmic Sweep
- Amplitude or Frequency Modulation
- Built-in, 100MHz Frequency Counter with 5 Digit Display
- Voltage Controlled Frequency (VCF)
- Switchable 20dB Attenuator
- Variable Duty Cycle
- Variable DCV Offset
The FG3B Sweep/Function Generator features outstanding versatility and performance with
five signals available: sine wave, triangle wave, square wave, TTL, and adjustable CMOS
pulse outputs. The FG3B provides linear or logarithmic sweep of any of the selected signal
outputs, and performs either amplitude or frequency modulation with internal or external
modulating frequencies. Duty cycle control allows the 50% duty cycle of Output signals to
be changed to any desired value. This produces short duration pulses or sawtooth (ramp)
signals. The invert button allows you to change the polarity of the signal.
A built-in frequency counter eliminates the need to connect an external counter for you to
verify frequency settings. In addition, it can be used as a stand-alone counter for
measuring external signals up to 100MHz with excellent accuracy and low sensitivity. A
Voltage Controlled Frequency (VCF) option allows the user to vary frequency as a function
of the VCF input. A switchable 20dB output attenuator is available where low signal levels
are needed.
The FG3B is housed in a stylish case, featuring a cushion grip carrying handle/tilt stand,
rear cord wrap, and recessed areas in the top cover for easy stacking of multiple units.
Contact Rapid-Tech today if you require
any further information on Wavetek Meterman products or require a catalogue.
For additional information or to order, call Rapid-Tech today
|
