CIE 2606 1000 Amp AC/DC
True RMS Digital Current Clamp/Multimeter

3¾ digit, 3999 counts, Bar Graph display DC volts (Auto) 0-400mV/4/40/400/1000V ±0.5% AC volts (Auto) (True RMS) 0-400mV/4/40/400/750V   ±1.5% DC current 0 - 200A/1000A   ±1.5% AC current (True RMS) 0-200A / 1000A ±1.5% Resistance (Auto)  0-400W/4kW/40kW/400kW/4MW/40MW ±1.0% Capacitance (Auto) 0-4nF/40nF/400nF/4µF/40µF ±1.5% Frequency (Auto)  0-100Hz/1kHz/10kHz/100kHz/400kHz ±0.5% Resolution 100mV, 100mA, 0.1W, 1pF, 0.01Hz Diode Test Continuity test Data Hold Max/Min Hold Peak Hold (Zero) Relative Auto Power Off Jaw opening capability                               57mm Conductor                               70mm x 18mm bus bar Safety Test Leads Safety Input Jacks Overload Protection on all Ranges Safety IEC 1010-1,IEC 1010-2-032                                 UL, CE Approved

Download Data Sheet (PDF 130.3kBytes)

CIE 2608  2000 DCA/1500 ACA True RMS
Digital Current Clamp/Multimeter

CIE CA60 60 Amp AC/DC Current Clamp
for use with a Multimeter

•  

  • Uses two Hall-Effect sensors

  • For use with any multimeter with 200mV or/and 2V  ranges for direct readout.
    (with an input impedance of at least 1MW)

  • An LED lights up when the clamp meter is under power.

  • Zero adjustment knob to compensate the hysteresis effect in DC measurements.

  • Transformer ratio 10:1, 100:1

  • Output 1mV/10mA, 1mV/100mA

  • Current Range 0 to 60Amps 

  • Accuracy DC Amps ±1.5%
                      AC Amps±2% (40Hz-2kHz)
                      AC Amps±4%(2kHz-10kHz)
                      AC Amps±6%(10kHz-20kHz)

  • Jaw opening capability
                                  9mm Conductor

  • Safety Designed to meet                                 IEC 1010-1, IEC 1010-2-032 CE

d

Download Data Sheet (PDF26.9kBytes)

 

CIE CA600 600 Amp AC/DC Current Clamp
for use with a Multimeter

• Uses two Hall-Effect sensors

• For use with any multimeter with 200mV or/and 2V  ranges for direct readout.
  (with an input impedance of at least 1MW)

• An LED lights up when the clamp meter is under power.

• Zero adjustment knob to compensate the hysteresis effect in DC measurements.

• Transformer ratio 1000:1

• Output 1mV/Amp

• Current Range 0 to 600Amps 

• Accuracy DC Amps ±2%+2A
                    AC Amps±3% +2A
                   (50Hz-400Hz)
                    

• Jaw opening capability
                                30mm Conductor

• Safety Designed to meet IEC 1010-1,
  IEC 1010-2-032 CE Approved

CIE 1000D 1000 AMP AC/DC Current Clamp
 for use with a Multimeter

• Uses two Hall-Effect sensors

• For use with any multimeter with 200mV or/and 2V  ranges for direct readout.
   (with an input impedance of at least 1MW)

• An LED lights up when the clamp meter is under power.

• Zero adjustment knob to compensate the hysteresis effect in DC measurements.

• Transformer ratio 1000:1

• Output 1mV/Amp

• Current Range 0 to 1000Amps 

• Accuracy DC Amps ±1.5%
                    AC Amps±1.5%+2 Amps
                    (50-60Hz)
                    AC Amps±3%+2 Amps
                   (60-400Hz)

• Jaw opening capability
                                57mm Conductor
                                70mm x 18mm bus bar

• Safety Designed to meet IEC 1010-1,
  IEC 1010-2-032 CE

Model CA-1000A AC Current Clamp
 for use with a Multimeter

• For use with any multimeter with 200mV
   or/and 2V  ranges for direct readout.
   (with an input impedance of at least 1MW)

• Transformer ratio 1000:1

• Output 1mV/Amp

• Current Range 0 to 1000Amps RMS

• Accuracy ±1.5% + 2 Amps (50-60Hz)
                    ±3% + 2 Amps    (60-400Hz)

• Jaw opening capability
                                57mm Conductor
                                70mm x 18mm bus bar

• Safety Designed to meet                                
  IEC 1010-1, IEC 1010-2-032 CE

Telephone

+61 3 9887 3777

Facsimile

+61 3 9800 3014

e-mail

rapid.tech@pobox.com