|
 Model 16 multimeter
With Thermometer
It’s a thermometer
The Fluke 16 measures temperature quickly and accurately. Standard
equipment includes an 80PK-1 bead probe thermocouple and an 80AK temperature adaptor,
which is compatible with a wide range of type K thermocouples with mini-connectors.
It’s a flame rod circuit tester
A microamp function is included for flame sensor measurements down to
0.1 microamps.
It’s a multimeter with capacitance
Use the Fluke test motor start and run capacitors up to 10,000
microfarads. Rely on the Fluke 16 to make your everyday measurements - up to 600 volts ac
or dc, 40 megohms, diode test and exceptionally fast continuity.
• Accurate temperature measurement from -40° C to 400° C
• Confidently test flame sensor circuits with microamp measurement down to 0.1
microamps
• Capacitance up to 10,000 microfarads
• Min/Max recording with relative time stamp records the highest and lowest voltage
readings during a 100-hour period
• Auto-ranging
• High resistance ranges to 40 Megohm
• Millivolt range for compatibility with other accessories
• V-Check™ mode is designed for safety. When measuring ohms, continuity, or
diode test modes, the meter automatically switches to measuring ac or dc volts if more
than 4.5V is present
• Continuity Capture™ locates intermittent opens as brief as
250 microseconds and identifies them in a symbolic display as short-to-open or
open-to-short
• Sleep mode preserves battery life
• 4000 count digital display
• Meter includes: 80PK-1 Bead Temperature Probe, 80AK Temperature Adaptor, TL75 Test
Leads, and C10 Holster
Safety
- 600V ac/dc, maximum voltage between any terminal and earth ground.
- Conforms to the requirements of IEC-1010-1, 1990-09 and
ANSI/ISA-S82.01-94 for use in Overvoltage Category III locations.
- Make ac or dc voltage measurements on electrical distribution systems to
600V where transients do not exceed 6 kV and only on circuits limited to 14 kVA if the
circuit voltage rating is above 250V.
Certification agencies (approvals/listings pending):
- UL Per standard UL 3111
- CSA Per standard CSA/CAN C22.2 No.1010.1-92
- TÜV Per standard EN61010 Part 1-1993
Drop test ANSI/ISA-S82.01-94 and EN61010 Part1-1993. 10 ft. drop to
hardwood on concrete
Size (HxWxL) 2.8 cm x 7.5 cm x 16.6 cm
Battery life 650 hours with Alkaline
Weight 340g
Function
|
Range
|
Resolution
|
Accuracy
|
DC Volts
|
4000 mV *
4.000 V
40.00 V
400.0 V
600. V |
1 mV
0.001 V
0.01 V
0.1 V
1 V |
0.9%+2
0.9%+2
0.9%+1
0.9%+1
0.9%+1 |
AC Volts
|
4000 mV*
4.000 V
40.00 V
400.0 V
600 V |
1 mV
0.001 V
0.01 V
0.1 V
1 V |
1.9%+3
1.9%+3
1.9%+3
1.9%+3
1.9%+3 |
Current AC/DC
|
200uA |
0.1uA |
0.5%+2 |
Ohms
|
400.0 Ohms
4.000 k Ohms
40.00 k Ohms
4.000 M Ohms
40.00 M Ohms |
0.1 Ohms
0.001 k Ohms
0.01 k Ohms
0.001 M Ohms
0.01 M Ohms |
0.9%+2
0.9%+1
0.9%+1
0.9%+1
0.9%+1 |
Capacitance
|
1.000 uF
10.00 uF
100.0 uF
1000 uF
10,000 uF |
0.001 uF
0.01 uF
00.1 uF
001 uF
0010 uF |
1.9%+2**
1.9%+2**
1.9%+2**
1.9%+2**
10%+90 typical** |
Temperature
|
15 to 750° F
-40 to -15° F
-10 to 400° C
-40 to -10° C |
0.1° F
0.1° F
0.1° C
0.1° C |
1%+1.5° F typical***
1%+2.7° F***
1%+.8° C typical***
1%+1.5° C *** |
* The 4000 mV range can only be entered in manual
range mode. Use the 4000 mV range with accessories
**The accuracy specification is for capacitors that have negligible dielectric absorption.
Capacitance measured with rc charge technique that evaluates C=Q/V. Capacitors with
non-negligible dielectric absorption can be measured, but measurement values may be in
error.
***The accuracy specifications for temperature do not include the error caused by the
thermocouple.
For additional information or to order, call Rapid-Tech
today
| 
