Logo of Rapid-Tech EquipmentRapid-Tech Equipment, Australia's leading supplier of quality test equipment.

The New Model 787
ProcessMeter

787_04_s.jpg (444851 bytes)The Fluke-787 ProcessMeter™ combines a DMM and a Loop Calibrator in one rugged, Handheld tool - for about what you would expect to pay for a loop calibrator alone. The 787 starts with the Fluke-87 DMM you know and trust, then adds ability to measure, source, and simulate DC loop current with 0.05% accuracy and 1 micro-amp resolution. When you carry the ProcessMeter™, you're ready for any loop troubleshooting or calibration task. And since it’s dust- and splash-resistant and EMI-shielded, the 787 can survive in your tool belt. The Fluke model 787 ProcessMeter™ should be in your tool box.

Features

  • DMM and loop calibrator in one tool
  • Precision 1000V, 440 mA digital Multimeter
  • Measure AC and DC volts,
  • AC and DC current, resistance, continuity, and frequency
  • 0.1% DC voltage accuracy
  • 0.05% DC current accuracy, 1 uA resolution to 30 mA
  • Simultaneous mA and % of scale readout
  • True RMS AC voltage measurement to 1 kHz
  • Frequency measurement to 20 kHz
  • Min/Max/Average/Hold/Relative modes
  • Diode Test and Continuity Beeper
  • DC current source / loop calibrator
  • 20 mA current source / simulator
  • Simultaneous mA and % of scale readout
  • Manual Step (25%, Coarse, Fine) plus Auto Step and Auto Ramp
  • Clear LCD with backlight; 4,000 counts (30,000 counts for DC current)
  • Externally accessible battery for easy battery changes
  • V overload protection on V, ohms, frequency
  • V overload protection on mA, backed-up by 440 mA 1000V fuse
  • Designed to meet 1000 volt IEC 1010 Cat III standards

Measurement

Measurement Function

Range and Resolution

Best Accuracy

(% of reading +LSD

VDC 400.0 mV, 40.00 V,400.0 V, 1000 V .01% +1
VAC (True RMS) 400.0m V, 40.00 V,400.0 V, 1000 V .07% +4
mADC 30.000 mA .05% +2
ADC 1.000 A (.0440A Continuous) .02% +2
AAC 1.000 A (.0440A Continuous) 1% +2
Resistance 400.0 Ohms, 4.000K, 40.00K, 400.0K, 4.0M, 40M .02% +1
Frequency (.05Hz to 20kHz) 199.99Hz, 1999.9Hz, 19.999kHz, .005% +1
Diode Test 2.400V (shows diode voltage drop) 2% +1
Continuity Beeps for resistance < approx. 100 ohms N/A

 Output

Output Function

Range and Resolution

Drive Capability

Accuracy

(% of span)

DC Current Output

 

(Internal battery operation)

0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power up)

Over-range to 24.000 mA

12 V Compliance, or 500 Ohms @ 20 mA .05%
DC Current Simulate (Ext. 24Volt Loop Supply) 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power up)

Over-range to 24.000 mA

1000 Ohms @ 20 mA .05%
Current Adjustment Modes Manual: Coarse, Fine, 25% step

Automatic: Slow ramp, Fast ramp, 25% step

N/A N/A

Temperature range of 18° C to 28° C, for one year after calibration 

General Specifications:

  • Maximum voltage applied between any jack and Earth Ground: 1000 V RMS
  • Storage Temperature: -40° C to 60° C
  • Operating Temperature: -20° C to 55° C
  • Temperature Coefficient: 0.05 x (specified accuracy) per °C (for temperatures < 18° C or > 28° C)
  • Temperature Coefficient: 0.05 x (specified accuracy) per °C (for temperatures < 18° C or > 28° C)
  • Relative Humidity: 95% up to 30° C; 75% up to 40° C; 45% up to 50° C; 35% up to 55° C
  • Vibration: Random, 2g, 5-500 Hz.
  • Shock: 1 meter drop test
  • Safety: Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 1010..1-92 Over-voltage Category III
  • Size: 32 mm H x 87 mm W x 187 mm L (1.25 in H x 3.41 in W x 7.35 in L)
  • Size, with holster and Flex-Stand: 52 mm H x 98 mm W x 201 mm L (2.06 in H x 3.86 in W x 7.93 in L)
  • Weight: 369 g (13 oz); with holster and Flex-Stand 638 g (22.5 oz)
  • Battery: Single 9V Alkaline battery (ANSI/NEDA 1604A or IEC 6LR61)
  • Battery Life: 50 hours typical (measurement), 12 hours typical (sourcing 12 mA)
  • Warranty: 3 years

 

Ordering Information

Fluke 787 ProcessMeter including:

  • C81Y protective yellow holster with Flex-Stand™
  • TL75 Safety-designed test lead set plus AC70A Alligator Clips
  • One 9V alkaline battery (installed)
  • Users Manual and Quick Reference Guide

    For additional information or to order, call Rapid-Tech today

    Telephone

    +61 3 9887 3777

    Facsimile

    +61 3 9800 3014

    e-mail

    fluke@pobox.com