|
A three-in-one tool
ScopeMeter 120 Series combines a 40 or 20
MHz dual input digital storage oscilloscope, two true-RMS
digital multimeters and a dual input TrendPlot™ recorder all
in a compact, battery powered instrument. Leave all other test
tools behind, the ScopeMeter 120 Series is the only tool
you’ll need.
The confidence to do a better
job
Working under time pressure and
in cramped or difficult to reach locations means you want to
focus on the job at hand, not on the test tool in your hand.
Which is why the ScopeMeter 120 Series has Connect-and-View
automatic triggering (see side panel). You don’t have to worry
about triggering and instrument settings, and you have all the
information on screen to do the job right.
One test lead measures all
High frequency waveform-, meter-,
capacitance- and resistance-measurements as well as continuity
checks are all covered by the shielded test leads. No time
wasted finding or swapping leads. The included accessories
allow hook-up at test objects of every dimension.
Battery powered mobility
Up to seven hours of battery operation
frees you from mains outlets for true on-the- move working.
The handheld format and the weight of just 1.2 kg, make the
instrument easy to carry and to fit comfortably in your hand.
The rugged and drip proof case assures long life and reliable
operation in the harshest industrial environments.
Floating measurements, safety
certified
While conventional oscilloscopes can only
make measurements referenced to power line ground, the Fluke
120 Series make floating measurements so there is no risk of
an accidental ground short circuit when making a connection.
The ScopeMeter 120 Series and the included shielded test leads
are safety certified for measurements on 600 V CAT III
industrial power systems. And using the VPS40 probe,
measurements up to 1000 V CAT II re fully sup-ported! Via the
optically isolated RS-232 interface, the ScopeMeter 120 Series
can be safely connected to a printer for direct print-out or
to a PC for later analysis and documentation using FlukeView
software.
Connect-and-View™ triggering for
an instant, stable display
Scope users know how difficult triggering
can be. Wrong settings show unstable and sometimes wrong
results. Fluke’s unique Connect-and-View recognizes signal
patterns, and automatically sets up correct triggering. It
provides a stable, reliable and repeatable display of
virtually any signal - including motor drive and control
signals - without you touching a button. Signal changes are
instantly recognized and settings adjusted for a stable
display. Benefit from the speed and convenience when measuring
a number of test points in quick succession.
Use TrendPlot™ to help find
intermittents, fast
The toughest faults to find are those that
happen only once in a while: intermit-tents. They can be
caused by bad connections, dust, dirt, corrosion or simply
broken wiring or connectors. You may not be around to see it —
your Fluke ScopeMeter will. In this “paperless recorder” mode,
you can plot the minimum and maximum peak values and average
over time – up to 22 days (Fluke 190 Series) or 16 days (Fluke
120 Series). The two inputs can plot any combination of volts,
amps, temperature, frequency and phase - with time and date
stamp -to help lead you to the cause of those faults quickly.
FlukeView® Software for documenting, archiving and analysis
FlukeView® for Windows® helps you get more out of your
ScopeMeter by:
|
