Fluke 125 ScopeMeter Features

	*Model 125 Portable Oscilloscope Features*
	Fluke Test Instrument Index > *ScopeMeter Test Tool Index* >
	*Model 125 ScopeMeter* > *Features* > *Specifications* > *Ordering Information*

	Model125 ScopeMeter® - Features

Fluke Model 125 Scopemeter including carrying case and standard accessories

Features

Two 5000 count true RMS digital multimeters.
A dual-input TrentPlot^TM recorder.
Connect-and-View^TM trigger simplicity for hands-off operation.
Industrial Network Bus Health mode.
Power Measurements for single phase and balanced 3-phase systems.
Harmonics mode, up to 33rd harmonic (24th in 400Hz).
High resolution, low impedance measurements.
Reading of Hz and Rotations Per Minute (RPM) for use with electrical and combustion engines.
Measurement of Vpwm for use on motor drive outputs.
‘Save and recall’ using a user-defined name.
Fluke i400s Current Clamp included as a standard.

ScopeMeter® Performance Features

Key Benefits

Bus Health mode
Industrial Buses (so called ‘Field Buses’) link the machinery on the factory floor to each other, to sensors, actuators and to a central computer and control system. The Fluke 125 now offers extensive capabilities to test the proper functioning of the network by analyzing the electrical signals on the network (see screen copy).
Supported Field bus types are:

AS-i bus
CAN-bus
Interbus
ControlNet
MOD-Bus
Foundation Fieldbus
Capacity to define two ‘user defined’ network type.
Profibus
Ethernet (coax and TP, 10 Mb/s)
RS-232
RS-485

Note: the Bus Health function is not a protocol analyzer but is a tool to investigate the electrical layer of the communications system, giving ‘good’ or ‘no good’ indicators for individual parameters of the electrical system.

Bus Health Screen

Example of Bus Health screen

Power Measurements for single phase and balanced 3-phase systems:

Watts
VA
VAR
Power Factor (PF)
High resolution, low impedance measurements

Harmonics mode, up to 33rd harmonic
(see screen copy). This mode supports a wide range of fundamental mains frequencies including 16.?, 50, 60 and 400 Hz systems!
High resolution, low impedance measurements
50.00 W full scale, for use on motor windings and other low resistance wiring.
Reading of Hz and Rotations Per Minute (RPM) for use with electrical and combustion engines.
Input signal can be:

2 rotations per 1 pulse.
1 rotation per 1 pulse.
1 rotation per 2 pulses.
1 rotation per 4 pulses

Fluke Model 125. Example of Harmonics mode screen

Example of Harmonics mode screen

Measurement of Vpwm for use on motor drive outputs
as was implemented on the 190-series before
‘Save and recall’ using a user-defined name
for the stored data set. Each data set (up 9 pieces) contains screen + set-up + data. Names can be created freely and altered at a later stage.
Fluke i400s Current Clamp included as a standard with Fluke 125. Furthermore, the i5s current clamp is supported by the 125 firmware. Note: The full level of functionality of the Fluke 124 is included in the 125. And also all accessories found with the 124 are included.
New edition of FlukeView ScopeMeter SW90W V4.4
The functionality level in conjunction with the 120-series is no different from V4.3 and V4.2
Shipments of the Fluke-125/S and of the SCC120 will include the V4.4 per the release of the Fluke-125. For customers who have release V4.x, a free update will be available through the Fluke public website.

Fluke Model 125. Example bus Ethernet Screen