|
Technical Specifications |
|
ScopeMeter® |
Fluke 125 |
Fluke 124 |
Fluke 123 |
| Display |
10.2 cm Monochrome LCD |
| Bandwidth |
40 MHz |
40 MHz |
20 MHz |
| Number of
Inputs |
Two Opto-isolated External Trig. thru ITP120 |
True RMS
Multimeter
|
Dual fully featured 5000 counts DMM
Vdc, Vac, Vac+Vdc, Ohms, Continuity, Diode-test, Current,
°C, °F,
capacitance, dBV, dBM, Crest Factor, Touch Hold
and Zero-set |
| Dual Input
|
Yes |
Yes |
Yes |
Cursors
|
ΔT, 1/ΔT,
V, ΔV,
rise and fall time |
ΔT, 1/ΔT,
V, ΔV,
rise and fall time |
- |
TrendPlot
Recording
|
Automatic vertical scaling and time compression.
Displays the actual, MIN, MAX and AVG reading. |
Trigger
Types
|
Connect-and-ViewTM, Free Run, Single Shot,
Edge, Video |
Scope
Measurements
|
As 124 + Power, VA, VAR, PF, RPM, Vpwm;
THD |
Cursors + 26 automatic measurements |
26 automatic measurements
|
| Real-Time
Sample Rate |
25MS/s |
| Inputs and
Digitizers |
2 |
2 |
2 |
| Time-Base
Range |
20 ns - 1 min/div |
20 ns - 1 min/div |
10 ns - 1 min/div |
| Input
Sensitivity |
5mV - 500V/div |
5mV - 500V/div |
5mV - 500V/div |
Trigger
Types
|
Connect-and-viewTM, Free Run, Single Shot, Edge,
Video, External |
| Glitch
Capture |
40 ns |
40 ns |
40 ns |
| Maximum
Record Length |
512 min/max pts per input |
| Scope
Envelope Mode |
Yes |
Bus Health
Test Function
|
For Std Industry Buses |
- |
- |
| Waveform
Mathematics |
Harmonics Mode |
- |
- |
Power
Measurements
|
Power, VA, VAR, PF, RPM, Vpwm |
- |
- |
| Memory
Screen set-up's |
20 screens and
setups |
20 screens and
setups |
10 screens and
setups |
|
| |
| |
|
Environmental
Specifications |
| Operating Temperature |
0°C
to 50°C |
| Storage Temperature |
-20°C
to +60°C |
| Operating Altitude |
3000 meters |
|
| |
| |
|
Safety Specifications |
| Electrical Safety |
600V CAT III (EN61010-1) |
|
| |
| |
|
General Specifications |
| Size |
232mm x 115mm x 50mm |
| Weight |
1.2 kg |
Warranty
|
3 years on main instrument
(parts and labor), 1 year on the standard accessories |
| Battery Life |
7 hour Ni-HM (BP120MH)
Installed |
| PC and Printer
Interface |
Using optional Optically
Insulated adapter / cable OC4USB (USB) or PM9080 (RS -232) |
|
|
