Fluke 1503 and 1507 Insulation Tester Specifications

	*Models 1503/1507 Insulation Tester Specifications*
	Fluke Test Instrument Index *> Utility Test Tool Index* > Insulation Tester Index >**
	Models 1503/1507 Features > Specifications > Ordering Information >

Models 1503 and 1507 Insulation Tester - Specifications

AC/DC Voltage Measurement

Accuracy

Range:	600.0Volts
Resolution:	0.1 Volt
Frequency:	50Hz - 400Hz ±(2% of reading + 3 digits)

Input Impedance

3MΩ (nominal), < 100pF

Common Mode Rejection Ratio

1kΩ unbalanced

>60dB at DC, 50Hz or 60Hz

Overload Protection

600 Volts RMS or DC

Earth Bond Resistance Measurement

Range/Resolution

20.00Ω:	0.01Ω
200.0Ω:	0.1Ω
2000Ω:	1.0Ω
20.00kΩ:	0.01kΩ

Accuracy

±(1.5% of reading + 3 digits)

Overload Protection

2 volts RMS or DC

Open Circuit Test Voltage

> 4.0 Volts, < 8.0 Volts

Short Circuit Current

> 200.0 mA

Insulation Specifications

Measurement Range

1503:	0.01 MΩ to 2000 MΩ
1507:	0.01 MΩ to 10 GΩ

Test Voltages

1503:	500V, 1000V
1507:	50V, 100V, 250V, 500V, 1000V

Test Voltage Accuracy

+20%, -0%

Short Circuit Current

1 mA nominal

Auto Discharge

Discharge time <o.5 second for C= 1µF or less

Live Circuit Indicator

Inhibit test if terminal voltage >30V prior to initialization of test

Maximum Capacitive Load

Operable with up to 1µF load

Measurement Accuracy

50V:	±(3% of reading + 5 digits)
100V:	±(3% of reading + 5 digits)
250V:	±(1.5% of reading + 5 digits)
500V:	±(1.5% of reading + 5 digits)
1000V:	±(1.5% of reading + 5 digits) to 2000MΩ
	±(10% of reading + 3 digits) above 2000MΩ

General Specifications

Maximum Voltage Applied to any Terminal

600 Volts AC RMS or DC

Storage Temperature

-40 °C to 60 °C (-40 °F to 140 °F)

Operating Temperature

-20 °C to 55 °C (-4 °F to 131 °F)

Temperature Coefficient

0.05 x (specified accuracy) per °C for temperatures
< 18 °C or > 28 °C (< 64 °F or > 82 °F)

Relative Humidity

0% to 95% @ 10 °C to 30 °C (50 °F to 86 °F)

0% to 75% @ 30 °C to 40 °C (86 °F to 104 °F)

0% to 40% @ 40 °C to 55 °C (104 °F to 131 °F)

Vibration

Random, 2g, 5-500 Hz per MIL-PRF- 28800F, Class 2 Instrument

Shock

1 meter drop per IEC 61010-1 2nd Edition (1 meter drop test, six sides, oak floor)

Electromagnetic Compatibility

In an RF field of 3 V/M, accuracy = specified accuracy
(EN 61326-1:1997)

Safety

Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 No. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement category IV 600V (CAT IV)

Certifications

CSA per standard CSA/CAN C22.2 No. 61010.1-04; TUV per standard IEC/EN 61010-1 2nd Edition

Batteries

Four 'AA' batteries (NEDA 15A or IEC LR6)

Battery Life
	Insulation Test:

	Resistance Measurements:

Tester can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000V into 1MΩ with a duty cycle of 5 seconds on and 25 seconds off.

Tester can perform at least 2500 earth bond resistance measurements with fresh alkaline batteries at room temperature. These are standard tests of 1Ω with a duty cycle of 5 seconds on and 25 seconds off.

Size

5.00cm (H) x 10.0cm (W) x 20.3cm (L)
1.97" (H) x 3.94" (W) x 8.00" (L)

Weight

550gms (1.2lb)

IP Rating

IP40

Altitude
	Operating:
	Non-operating (storage):

2000 meters CAT IV 600V, 3000 meters CAT III 600V

12,000 meters

Over-range Capability

110% of range