Model 5080A Multi-Product Calibrator Features

Accurate, Reliable analog meter calibration
The 5080A calibrator calibrates your analog workload accurately and reliably, thanks to its high voltage and current compliance. With maximum burden up to 800mA for AC/DC voltage, and voltage up to 50V for AC/Dc current, the 8050A can drive a wide range of analog meters.
 

• Clamp meters. The 10/50 turn coil (Fluke 9100-200) and the 50-turn current coil (Fluke 5500A/COIL) enables the 5080A to calibrate most popular clamp meters at currents up to 1000 amps rms.
• Oscilloscopes. Calibrate oscilloscopes to 200MHz quickly, easily, and cost effectively. Verify dynamic response, bandwidth, timing, multiple triggering functions, and input resistance.
• Megohm meters. This option sources high ohms, high voltage resistors up to 18Gohms. It also measures high voltage outputs.

Protective Circuits prevent damage
Mains voltage inadvertently applied to a calibrator's output terminals can cause extensive damage, requiring costly repairs. Electrical protection for calibrator outputs is vital for daily operation. The 5080A calibrator's innovative protection circuitry prevents it from being damaged by reversed input voltage, so you can use it with confidence day after day.

Highest Voltage and Current Compliance
The Fluke 5080A has the highest voltage and current compliance of any calibrator in the Fluke multi-product and multifunction families, making it an ideal solution for calibrating analog meters and other instruments requiring higher drive capability for proper operation.

Note *: With AC LCOMP on

Automate the 5080A Calibrator to increase efficiency and throughput
Versatile software applications enable automated calibration as well as paperless data collection and reporting.

• 5080/CAL. The 5080/CAL software is designed for calibrating analog and digital workload with the 5080A calibrator. It enables you to automate calibration, manage inventory, collect data and print reports, easily and economically.

• MET/CAL® Light for 5080A. MET/CAL Lite provides the power of MET/CAL Plus software in a lower cost version designed for use with the 5080A.

• MET/CAL® Plus. For the full spectrum of calibration automation and asset management, choose MET/CAL Plus software. Add Manual MET/CAL software for mechanical or dimensional workload where automation is not required. The solutions you need, from the leader in calibration.

The solutions you need from the leader in calibration
Fluke is a premium brand, well known around the world for its accurate, dependable, high quality products. Long known as leader in DC and Low Frequency AC calibration. Fluke is also recognized for its offerings in Temperature, Pressure, Power, Process, and RF calibration. Fluke provides the calibrators, standards, software, service, support and training for a complete solution in your Cal Lab.