Double Your Power
A maintenance and calibration tool that will be at home in every instrumentation technician's tool box, the Fluke 787 ProcessMeter^TM combines a DMM and a Loop Calibrator in one rugged, handheld tool, for about what you would expect to pay for a loop calibrator alone. Based on the trusted Fluke 87 DMM, the 787 adds the ability to measure, source, and simulate dc loop current with 0.05% accuracy and 1 microamp resolution.
 

• Simultaneous mA and % of scale readout on mA output.
• 25% Manual Step plus Auto Step and Auto Ramp on mA output.
• Clear LCD with backlight; 4,000 counts (30,000 counts for dc current)
• Min/Max/Average/Hold/Relative modes.
• Externally accessible battery for easy battery changes.
• 1000V overload protection on V, ohms, frequency.
• 150V overload protection on mA, backed up by 440 mA 1000V fuse.

Fluke combined the DMM you trust with the loop calibrator you need. The 787 gives you the measurement capabilities you expect from our rugged, reliable DMMs  plus the ability  to source, simulate, or measure dc  current  with 1 microamp resolution and accuracy of 0.05%. Put it all together and you have the ideal tool for troubleshooting and calibrating current loop applications.

Here's the power the 787 ProcessMeter puts into your hands.
 

• Measure ac and dc volts, ac and dc current, resistance, continuity, and frequency.
• 0.1% dc voltage accuracy.
• 0.05% dc current accuracy, 1 ‘A resolution to 30 mA.
• Simultaneous mA and % of scale readout.
• True rms ac voltage measurement to 1 kHz.
• Frequency measurement to 20 kHz.
• Min/Max/Average/Touch-Hold/Relative modes.
• Diode test and continuity beeper.

• 20 mA current source/simulator.
• Simultaneous mA and % of scale readout.
• Manual step (25%, coarse, fine) plus auto step and auto ramp.