Fluke DP120 Differential Probe

	*Model DP120*
	Accessory Index > ScopeMeter Accessories >

	Model DP120 Differential Probe with Shrouded Banana Probe Tips

Model DP120 Features

Description
The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielded BNC is 5MΩ in parallel with 6pF. Input impedance between the inputs is 10MΩ with a capacitance of 5pF. Included accessories are AC85A large jaw alligator clips and AC83 pin-grabber test clips.

Model DP120 Differential Probe with Shrouded Banana Probe Tips

Specification
Input:	Probes with shrouded banana probe tip.
Probe Length:	1.5 meter (60 inches).
Maximum Input Voltage to Ground:	600V rms CAT III per IEC 1010-2-031 / 1000V rms CAT II per IEC 1010-2-031.
Maximum Differential Voltage:	1000V DC or 1000V rms or 1200V (DC + AC Peak).
Output Cable:	Safety designed 1.5m (5ft) BNC Cable.
Attenuation:	200x and 20x.
Bandwidth:	DC to 20MHz (-3dB).
Accuracy:	±2.5%
Rise Time:	17.5 nS.
CMRR:	200x: @60Hz=80dB, @1MHz=50dB
	20x: @60Hz=70dB, @1MHz=40dB.
Battery Type:	Alkaline 9 Volt, NEDA, IEC6LR61.
Battery Life:	8-hour operation, 400-hour stand by.
Power Adapter:	PM 8907/80n (optional).