|
Model i1000s Features |
|
For use with DMM's,
Oscilloscopes, ScopeMeters and
Power Quality Analyzers
The Fluke i1000s is a clamp-on AC current probe designed to
expand oscilloscope applications in industrial and power
environments. The Current Probe is ideal for measuring
distorted current waveforms and harmonics.
|
|
 |
Features
-
Allows accurate measurement of currents
from 100mA to 1000 Amps rms, 5hZ to 100kHz without
breaking into the circuit.
-
A passive filter eliminates noise and ring
on rapidly rising di/dt waveform, ensuring accurate screen
displays.
-
Connects directly to an oscilloscope
through a reinforced coaxial cable and an insulated BNC
connector.
-
Output levels 1mV/A, 10mV/A and 100mV/A.
-
Can be used with multimeters with optional
PM9081/001 BNC/Banana adapter.
- One year warranty.
|
|
|
|
|
Technical Specifications |
|
Nominal Current Range
|
10 Amps
100 Amps
1000 Amps |
|
Continuous Current Range
|
0.1 Amp to 10 Amps
0.1 Amp to 100 Amps
1 Amp to 1000 Amps |
|
Maximum Non-Destructive
Current |
2000 Amps |
|
Lowest Measurable Current |
0.1 Amp |
|
Basic Accuracy
|
1% +1 amp (48Hz to 65 Hz)
(% of reading + floor-spec) |
|
Useable Frequency |
5 Hz to 100 kHz |
|
Output Level(s)
|
100mV/Amp
10mV/Amp
1mV/Amp |
|
Safety |
CAT IV, 300 Volts, CAT III, 600
Volts |
|
Maximum Voltage |
600 Volts AC |
|
| |
| |
|
General Specifications |
|
Warranty |
One year |
|
Maximum Conductor Diameter |
54mm |
|
Output Cable Length |
1.6 meters |
|
BNC Adapter |
Yes |
|
|
