|
Model i1010 Features |
|
AC/DC Current Clamp for DMM's
Fluke Current Clamps are the ideal tools to extend the
current ranges of DMM's. |
|
|
Features
-
Battery-powered Hall-effect clamp-on probe measures ac
current to 600A, dc current to 1000A.
- Output
is 1 mV per amp dc or ac.
-
Maximum conductor size: one 1.18" (30 mm) or two 0.98" (25
mm).
Accuracy
-
±(2%+0.5A), 1A to 1000A, 45Hz to 400Hz.
-
±(3+0.5A), 1A to 600A, 400Hz to 2kHz sinewave.
|
|
|
|
|
Technical Specifications |
|
Measurement Type |
Hall sensor |
|
Nominal Current Range |
600 Amps AC
1000 Amps DC |
|
Continuous Current Range |
1 Amp to 600
Amps AC
1 Amp to 1000 Amps DC |
|
Maximum Non-Destructive
Current |
1000 Amps |
|
Lowest Measurable Current |
0.5 Amp |
|
Basic Accuracy |
2% + 0.5 Amp (% of reading +
floor-spec) |
|
Useable Frequency |
DC to 10kHz |
|
Output Level(s) |
1mV/Amp |
|
Zero Error Adjustment |
Yes |
|
Safety |
CAT III, 600
Volts |
|
Maximum Voltage |
600 Volts AC |
|
| |
|
General Specifications |
|
Warranty |
One year |
|
Maximum Conductor Diameter
|
30mm
2 x 25mm |
|
Output Cable Length |
1.6 meters |
|
Shrouded Banana Plugs |
Yes |
|
Battery Life |
9 Volt, 60-hours |
|
|
