Model i200s Features

i200s Current Clamp for use with DMM's, Oscilloscopes, ScopeMeters and Power Quality Analyzers

Small sized, convenient-to-use current clamp
The i200s is a dual range 20A and 200A ac current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs.
 

Features

• Measuring range: 0.1 to 24A and 0.5 to 240A.

• The output signal is 100 mV/A in the 20A range and 10 mV/A in the 200A range.

• Includes BNC connector making it suitable for use with any oscilloscope, power analyzer or ScopeMeter" test tool having a compatible BNC input connector.

• Dual banana to BNC adapter is included for use with DMMs.

• Maximum current 240A ac.

• 40 Hz to 10 kHz frequency response.

• Jaw opening 21 mm.

• Maximum conductor size 20 mm dia. or busbar 20 x 5 mm.

• EN61010, CAT III 600V

• One year warranty.

Technical Specifications

Nominal Current Range

20 Amp
200 Amp

Continuous Current Range

0.1 Amp to 24 Amps
0.5 Amp to 200 Amps

Maximum Non-Destructive Current

240 Amps

Lowest Measurable Current

0.1 Amp

Basic Accuracy

1.5% +0.5 Amp (48Hz to 65Hz)
(% of reading + floor-spec)

Useable Frequency

40 Hz to 10kHz

Output Level(s)

100 mV/Amp
10mV/Amp

Safety

CAT III, 600 Volt

Maximum Voltage

600 Volt AC

General Specifications

Warranty

One year

Maximum Conductor Diameter

20mm

Maximum Conductor Size (busbar)

20mm x 5mm

Output Cable Length

2.0 meters

BNC Adapter

Yes

BNC to Banana Adapter (included)

Yes