|
Model i400 Features |
|
High safety AC current clamp for DMM's
Fluke Current clamps are the ideal tools to extend the
functionality of Fluke Tools. The i400 is a single range
400Amp AC current clamp with current output via safety
shrouded banana plugs. The clamp is compatible with most
Fluke multimeters or any other current measurement device
that accepts 4mm-shrouded banana plugs and has an AC
milliamp range. The division ratio is 1000:1.
|
|
 |
Features
-
Companion to your DMM to measure up to 400 Amps AC.
-
1mA/Amp output guarantees easy reading on your meter.
-
Only current clamp available with a CAT IV 600V, CAT III
1000V rating.
-
Specially designed to offer maximum utility in a very
compact shape.
-
Take accurate current readings without breaking the
circuit.
-
Soft non-slippery overmold handle prevents from accidental
touching live wiring.
-
Maximum
conductor diameter 32mm.
|
|
|
|
|
Technical Specifications |
|
Nominal Current Range |
400 Amps |
|
Continuous Current Range |
1 Amp to 400 Amps |
|
Maximum Non-Destructive
Current |
1000 Amps |
|
Lowest Measurable Current |
1 Amp |
|
Basic Accuracy |
2% +0.06 amp (45Hz to 400 Hz)
(% of reading + floor-spec) |
|
Useable Frequency |
5 Hz to 20 kHz |
|
Output Level(s) |
1mA/amp |
|
Safety |
CAT IV, 600 Volt, CAT III, 1000
Volt |
|
Maximum Voltage |
1000 volts AC rms from earth to
ground, in compliance with EN61010 |
|
| |
| |
|
General Specifications |
|
Warranty |
One year |
|
Maximum Conductor Diameter |
32mm (1.25") |
|
Maximum Conductor Size
(busbar) |
750 MCM |
|
Output Cable Length |
1.5 meters |
|
Shrouded banana Plugs |
Yes |
|
|