|
Model PAC91 Features |
|
Description
The PAC 91 makes it possible to connect the
optical output of Fluke test tools directly to
widely-used parallel printer interfaces. The PAC91
converter has an optical RS-232 (serial) input and
a parallel data (Centronics) output.
|
 |
Features
- Easy connection: Optical connector hooks
directly to Fluke test tools with an optical
interface.
- Standard, 25-pin connector for Centronics
printer cable.
- Battery-powered for field use.
- Auto Power-off mode helps conserve
batteries.
- "Busy" and "Power" indicator LED's.
- 9600 baud communication speed keeps up with
fast printers.
|
Specifications
Optical Input:
Optical RS-232, 9600 baud, 8 bits, no parity, 1
stop bit, Xon/Xoff handshake.
Output: Centronics (TTL levels,), 8 bit
parallel with handshake. DB-25 female connector.
Battery: Alkaline 9V, IEC 6LR61 (NEDA
1604). Battery lifetime >20 hrs. at room
temperature.
Power switch settings: 'Auto off' mode
gives auto power-down 5 minutes after last data
transfer.
Dimensions: 123 x 76 x 30 mm (4.85 x 3 x
1.2 inch); cable length: 30 cm (1 ft).
Environmental: Temperature range 0oC to
+50oC (operating), -40oC to +70oC (storage).
Warranty: 1 year
Supported instruments: ScopeMeter test
tools, power harmonics analyzers and graphical
multimeters. |
|
|
|
