|
|
 |
VR101s Single-Phase Voltage Event
Recorder - Specifications |
|
|
|
|
Technical Specifications |
|
Electrical |
|
Nominal Supply: |
120V version: 70V to 140V |
| |
230V version: 140V to 270V |
|
Nominal Frequencies: |
120V version: 50 Hz or 60 Hz |
| |
230V version: 50 Hz or 60 Hz |
|
Power Consumption: |
120V version: 2W |
| |
230V version: 3W |
|
|
Sags, Swells and Outage |
|
Hot-to-neutral |
|
|
Range: |
120V version: 0 to 200V |
| |
230V version: 0 to 400V |
|
Accuracy: |
120V version: ±2V rms |
| |
230V version: ±4V rms |
|
Resolution: |
120V version: 1V rms |
| |
230V version: 2V rms |
|
Neutral-to-ground |
|
Range: |
120V version: 3 to 200V |
| |
230V version: 3 to 120V |
|
Accuracy: |
120V version: ±2V rms |
| |
230V version: ±2V rms |
|
Resolution: |
120V version: 1V rms |
| |
230V version: 1V rms |
|
|
Transient Measurements* |
|
Hot-to-neutral |
|
|
Range: |
100 to 2500V peak |
|
Accuracy: |
±(10% reading + 10V) |
|
Resolution: |
10V |
|
Neutral-to-ground |
|
Range: |
50 to 2500V peak |
|
Accuracy: |
±(10% reading + 10V) |
|
Resolution: |
10V |
|
Phase angle |
|
|
Range: |
20° to 180°, 200° to 360° |
|
Accuracy: |
±1° |
|
Resolution: |
1° |
|
|
Time Measurements |
|
Hot-to-neutral |
|
|
Accuracy: |
±0.5 cycles |
|
Resolution: |
0.5 cycles |
|
Neutral-to-ground |
|
|
Accuracy: |
±1 cycle |
|
Resolution: |
1 cycle |
|
|
Events >=1 second |
|
Accuracy: |
±(2 sec/day + 8 sec) |
|
Resolution: |
8 sec |
|
|
Frequency |
|
Range: |
45 to 65 Hz |
|
Accuracy: |
±0.1 Hz (3 cycles min) |
|
Resolution: |
0.1 Hz |
|
|
|
Note: *Minimum pulse width: 1 µs |
|
|
|
|
|
Environmental Specifications |
|
Operating temperature
|
|
-40 to 70ºC (-40 to 160 ºF) |
|
|
Humidity (Without
Condensation) |
|
|
|
|
|
|
|
Safety Standards |
|
Safety
|
|
Protected to EN61010-1 |
|
CAT III 300 V |
|
CSA and UL listed |
|
|
|
|
|
|
|
General Specifications |
|
Size |
| |
85 mm x 68 mm x 35 mm (3.35 in x 2.65 in
x 1.35 in) |
|
|
Weight |
|
|
Warranty |
|
|
Battery life |
|
|
Battery type |
| |
3.5V lithium (non-replaceable) |
|
|
Memory size |
|
|
Computer Hardware Requirements
|
| |
IBM PC or 100% compatible with Windows®
3.1, Windows® NT or Windows® 95/98 installed and operating |
| |
At least one free RS-232 serial port
|
| |
A pointing device (recommended) |
| |
2 MB hard drive space |
| |
4 MB RAM (8 MB for Windows 95/98) |
|
|
