Hart 5606 and 5607 Full Immersion PRTs Specifications

	*Model 5606 and 5607 Full Immersion PRTs - Specifications*
	*Hart Scientific Calibration Products > Thermometer Probes Secondary Standards >*
	Models 5606 and 5607 Features > Specifications > Ordering Information >


	Models 5606 and 5607 Full Immersion PRTs for Laboratory, Freezers, Autoclaves and Furnaces

Specifications	5606	5607
Temperature Range	-200°C to 160°C	-200°C to 450°C
Nominal Resistance at 0.01°C	100Ω ±0.1Ω	100Ω ±0.1Ω
Temperature Coefficient	0.00385Ω/Ω/°C	0.00385Ω/Ω/°C
Accuracy ^Note1	±0.04°C at 0.01°C ±0.06°C at 160°C	±0.04°C at 0.01°C ±0.07°C at 450°C
Short-Term Repeatability ^Note2Accuracy	±0.03°C at 0.01°C ±0.04°C at 160°C	±0.020°C at 0.01°C ±0.035°C at 450°C
Drift Accuracy ^Note3	±0.03°C at 0.01°C ±0.04°C at 160°C	±0.02°C at 0.01°C ±0.04°C at 450°C
Hysteresis	±0.015°C
Sheath Length	50mm ±5mm	40mm ±5mm
Sheath Diameter	31mm ±0.1mm
Sheath Material	316 SST	Inconel® 600
Transition Junction Temperature Range ^Note4	-200°C to 160°C	0°C to 450°C
Transition Junction Dimensions	No Transition	35mm x 7mm
Sensor Length	30mm ±3mm
Sensor Location	3mm ±1mm from tip
Minimum Insulation Resistance	20MΩ at 23°C	100MΩ at 23°C
Minimum Immersion Length	Full Immersion	Full Immersion
Maximum Immersion Depth in Liquid Medium	Full Immersion	Use SST or glass tube to protect transition junction
Maximum Immersion in Dry Medium	Full Immersion	Full Immersion
Response Time ^Note5	12 seconds typical	9 seconds typical
Self Heating (in 0°C Bath)	±0.003°C
Lead-wire Cable Type	Enameled copper wire	SST over-braid
Lead-wire Length	2.4 meters
Lead-wire Temperature Range	160°C	450°C
Calibration	Calibration not included. NVLAP accredited calibration available. See ordering code.

Note¹:	Includes calibration and 100 hour drift (k=2).
Note²:	Three thermal cycles from minimum to maximum temperature, includes hysteresis, 95% confidence (k=2).
Note³:	After 100 hours at maximum temperature, 95% confidence (k=2).
Note⁴:	Temperature outside this range will cause irreparable damage.
Note⁵:	Per ASTM E 644

Calibration Uncertainty (Model 5606)

Temperature	1924 Calibration Uncertainty Note*	Tolerance without Calibration**
-197°C	0.03°C	0.4°C
-38°C	0.03°C	0.2°C
0°C	0.03°C	0.1°C
100°C	0.045°C	0.3°C
157°C	0.05°C	0.4°C

Calibration Uncertainty (Model 5607)

Temperature	1924 Calibration Uncertainty Note*	Tolerance without Calibration**
0°C	0.03°C	0.1°C
157°C	0.05°C	0.2°C
232°C	0.05°C	0.3°C
450°C	0.055°C	0.5°C

Note*	Lab code 200348-0
Note**	Each PRT includes a certificate with a measured R0 value.

An Uncalibrated 5606 or 5607 meets ASTM E 1137 Grade A Classification of Tolerances. Use the coefficients below to achieve the tolerances listed in the "No Calibration" column or calculate the Grade A tolerance using the following formula: Grade A = ±[0.13 + 0.0017\|t\|]°C where: \|t\|=value of temperature (°C) without regard to sign. See ASTM E 1137.
R0:	Enter the R0 value provided
A:	3.9083 x 10^-3
B:	-5.775 x 10^-7
C:	-4.183 x 10^-4