|
Parameter |
Value |
|
Temperature Range
|
|
5627A-12 |
-200°C to 420°C |
|
5627A-6 and 5627A-9 |
-200°C to 300°C |
|
|
Nominal Resistance |
100Ω ±0.5Ω |
|
Temperature Coefficient |
0.00385Ω/Ω/°C
nominal |
|
Drift Rate (k=2) |
±0.04°C at 0°C
after 100 hours at 420°C |
|
Sensor Material |
316 Stainless Steel |
|
Leads |
TeflonTM insulated,
nickel-plated stranded copper, 22 AWG |
|
Termination |
Specify. See
Ordering Information |
|
Time Constant
|
Four seconds maximum for 63.2%
response to step change in water moving at 3fps. |
|
Bending Radius
|
Sheath may be ordered with a bend on a
minimum radius of 19mm (3/4-in) except for 50mm (2-in) area of
sheaf near tip. (Hart Lab requires 20cm
(8-in) of unbent sheath to recalibrate.) |
|
Calibration
|
Includes manufacturer's
NVLAP-accredited (lab code 200706-0) calibration and table with RVS.
T values in 1°C increments from -196°C to
500°C (to 300°C for 5627A-6 and 5627A-9). ITS-90 coefficients
included. |
|
Immersion |
At least 100mm (4-in) recommended. |
|
Calibrated Accuracy Note1
(K=2)
|
±0.026°C at
-196°C
±0.046°C at 0°C
±0.007°C at 200°C
0.124±C at 420°C° |
|
Dimensions
|
|
5627A-12 |
305mm x 6.35mm |
|
5627A-9
|
229mm x 4.7mm |
|
5627A-6 |
152mm x 4.7mm |
|
