|
Model |
Secondary Ref |
|
Hart 5649-20-X |
Type 'R' Thermocouple, 508mm long |
|
Hart 5649-20CX |
Type 'R' Thermocouple, 508mm long,
with reference junction |
|
Hart 5649-25-X |
Type 'R' Thermocouple, 635mm long |
|
Hart 5649-25CX |
Type 'R' Thermocouple, 635mm long,
with reference junction |
|
Hart 5650-20-X |
Type 'S' Thermocouple, 508mm long |
|
Hart 5650-20CX |
Type 'S' Thermocouple, 508mm long,
with reference junction |
|
Hart 5650-25-X |
Type 'S' Thermocouple, 635mm long |
|
Hart 5650-25CX |
Type 'S' Thermocouple, 635mm long,
with reference junction |
|
Hart 1918-B |
Four-point calibration by fixed point
(Sn, Zn, AI, Ag). Extrapolated to 1450°C |
|
|
Note: Calibration uncertainty for individually calibrated 5650's
by fixed point is ±0.25°C below 1100°C and ±2.0°C
above 1100°C. (2609 case included with new models)
X= termination. Specify 'B' (bare wire),
'W' (generic copper-to-copper TC connected,
'R' (Standard Type R/S TC connector), or 'T' (INFO-CON for 1523 and
1524).
Models with reference junctions should not specify 'R'
and models without reference junction should not specify 'W' |
