Infrared Thermometer Calibrator - Models 9132/9133 - Features

Description
Whether you’re using in-line or handheld infrared pyrometers, you need good calibration standards to verify their accuracy. Our portable IR calibrators provide stable blackbody targets for calibrating non-contact IR thermometers from –30°C to 500°C. 

These units feature a temperature controlled measurement surface with a diameter of 2.25" (57 mm). The target temperature can be controlled in set-point increments of 0.1° from –30°C to 500°C and a well is located directly behind the blackbody surface for contact calibration.

These units are easy to use as "point and shoot." Simply set the desired blackbody temperature from the convenient front panel control buttons, wait a few minutes for equilibrium, and point the gun at the target. The radiated energy from the blackbody is measured by your IR thermometer. Simply compare its reading to the display on the blackbody and record the difference.
 

• Certify IR pyrometers from
  –30°C to 500°C (–22°F to 932°F).
• Large 57 mm (2.25 in) blackbody target.
• RTD reference well for contact temperature measurement.
• Small, compact design.

Model 1932
For all IR calibrations above normal ambient, the 9132 provides a stable blackbody target up to 500°C (932°F). With accuracy to ±0.5°C and stability to ±0.1°C, this new portable IR unit can certify most handheld pyrometers.

Short heating and cooling times mean you won’t have to wait long to get your work done. From room temperature to 500°C the Model 1932 will be stable within 30 minutes. You won't find a more compact IR calibrator.

Large target for calibrating all
IR thermometer types

Model 1933
If you’re calibrating IR guns at cold temperatures, you’ll love our new 9133. With solid-state cooling technology, this new IR calibrator reaches –30°C    (22°F) in normal ambient conditions. With a conveniently located dry gas fitting on the front bezel, ice build up on the target can be avoided. At the upper end of its range, the 9133 provides stable temperatures to 160°C    (320°F). 

With heating and cooling times of about 15 minutes from ambient to either extreme, the 9133 gets you to temperature quickly and performs when it gets there. Compare your IR devices to the temperature display-it's factory calibrated to be within ±0.4°C (±0.7°F).

No other IR calibrators give you this level of precision in such compact packages. Whatever your temperature application, trust a Hart Scientific product to solve it..

The model 9133 includes a quick-attach fitting on the front bezel for dry air purging, which eliminates ice buildup on the target