 |
Model DET4TC2 + Kit
Earth/Ground Tester |
|
DET4TC2 + clamps
Complete earth system testing field pack for four pole, attached rod and
stakeless techniques
|
|
 |
Features
- Extended 200kΩ measurement range.
- Offers a full testing kit all in one
box.
- 2, 3 and 4 point testing at the turn of a switch..
- Attached Rod Technique (ART).
- Stakeless measurement.
- Simple one button operation.
- Automatic circuit checking.
- User selectable output voltage.
- Backlit display.
- Weather and dustproof to IP54.
- Packed in tough carry case.
- Complete with leads and stakes, V and Iclamp, calibrator,
instrument calibration check and right angled terminal post
adaptors.
- Delivered with calibration certificate.
|
|
|
Specifications |
|
Display |
3.5" high contrast backlit LCD |
|
Ingress Protection |
IP54 |
|
C Spike, P Stake & noise Check |
Automatic |
|
Noise Rejection |
40V peak to peak |
|
2-Wire, 3-Wire Test, 4-Wire Test |
Yes, no shorting links required |
|
No Disconnect Testing (ART) |
Yes with ICLAMP |
|
Stakeless Measurement |
Yes with ICLAMP and VCLAMP |
Instrument Output
|
Voltage: |
|
Current: |
|
±25V or ±50V at 94Hz, 105Hz, 111Hz, and 128 Hz |
|
4.5mA or 0.45mA or 0.045mA |
|
Earth Voltage |
0V to 100V |
Resistance
|
Range:
0.01Ω to 200KΩ |
Accuracy:
|
2P measurements |
2% ±3 digits |
|
3P measurements |
2% ±3 digits |
|
4P measurements |
2% ±3 digits |
|
ART measurements |
5% ±3 digits |
|
Stakeless " " |
7% ±3 digits |
Maximum Probe Resistance
(50V output voltage) |
Rp Limit: 200kΩ |
Limits reduced to 100kΩ for 25V output voltage
Limits reduced to 5kΩ for 0.01Ω
resolution |
|
Rc Limit: 200kΩ |
|
Ground Current with Clamp |
Range: 0.5mA to 19.9A |
Accuracy: |
5% ±3 digits |
|
Ground Voltage |
Range: 0V to 100V AC |
Accuracy: |
2% ±2 volts |
|
|
|
|
|
|
Environmental Specifications |
|
EMC |
In accordance with IEC 61326-1 |
|
Operating Temperature |
-15°C to +55°C |
|
Storage Temperature |
-40°C to 70°C |
|
|
|
|
|
|
Safety |
|
Complies with the requirements |
of
IEC 61010-1 CAT IV 100V between terminal pairs |
|
|
|
|
|
|
Standards |
|
Standards Compliance |
Complies with the requirements of KEMA K85B.
Complies with the following parts of EN 61557,
"Electrical safety in low voltage distribution systems up to 1000V
AC and
1500V DC - Equipment for testing, measuring or monitoring of
protective measures".Part 1. General requirements
Part 2. Resistance to earth |
|
|
|
|
|
|
General Specifications |
Power
|
8 X type 'AA' LR6 batteries (Model DET4TC2), and 8 x type 'AA' (LR6)
NiMH rechargeable batteries for (Model DET4TCR2) |
Dimensions
|
203mm (W) x 148mm (H) x 78mm (D)
8" (W) x 5.7" (H) x 3.2" (D) |
|
Weight |
1kg |
|
|
|
|
|
|
Ordering Information (Professional
Kitted Options for ART and Stakeless Testing) |
Ordering Code 1000-404
|
Megger Model DET4TC2 + Kit, complete with stake and wire kit
(15m, 10m, 10m, 3m), Right angle terminal adaptors, ICLAMP (for ART
testing), VCLAMP (adds stakeless testing), Field Calibration check
for Instrument and Clamps, 8
type 'AA' batteries, carrying case, operating instructions, and a
Separate professional ground testing kit (2 x 50m, 2x 30m, 4 auger
stakes, tape measure, in hard carry case.. |
Ordering Code 1000-405
|
Megger Model DET4TCR2 + Kit (rechargeable), complete with stake and wire kit
(15m, 10m, 10m, 3m), Right angle terminal adaptors, ICLAMP (for ART
testing), VCLAMP (adds stakeless testing), Field Calibration check
for Instrument and Clamps, 8
type 'AA' LR6 NiMH rechargeable batteries, external AC/DC
charger unit, carrying case, operating instructions, and a Separate
professional ground testing kit (2 x 50m, 2x 30m, 4 auger stakes,
tape measure, in hard carry case.. |
|
|
|
|
|
|
Ordering Information (Kitted
Options for ART and Stakeless Testing) |
Ordering Code 1000-365
|
Megger Model DET4TC2 + Clamps, complete with stake and wire kit
(15m, 10m, 10m, 3m), Right angle terminal adaptors, ICLAMP (for ART
testing), VCLAMP (adds stakeless testing), Field Calibration check
for Instrument and Clamps, 8
type 'AA' batteries, carrying case and operating instructions. |
Ordering Code 1000-366
|
Megger Model DET4TCR2 + Clamps (rechargeable), complete with stake and wire kit
(15m, 10m, 10m, 3m), Right angle terminal adaptors, ICLAMP (for ART
testing), VCLAMP (adds stakeless testing), Field Calibration check
for Instrument and Clamps, 8
type 'AA' LR6 NiMH rechargeable batteries, external AC/DC
charger unit, carrying case and operating instructions. |
|
|
|
|
|
|
Ordering Information (Basic
Models) |
Ordering Code 1000-345
|
Megger Model DET4TC2 Tester, complete with stake and wire kit
(15m, 10m, 10m, 3m), Right angle terminal adaptors, 8
type 'AA' batteries, carrying case and operating instructions. |
Ordering Code 1000-346
|
Megger Model DET4TCR2 Tester, complete with stake and wire kit
(15m, 10m, 10m, 3m), Right angle terminal adaptors, 8
type 'AA' LR6 NiMH rechargeable batteries, external AC/DC
charger unit, carrying case and operating instructions. |
|
|
|
|
|
|
Optional Accessories |
|
Catalog # 5410-429 |
Replacement hard carry case |
|
Catalog # 6220-803 |
Right angled terminal adaptor set |
|
Catalog # 6220-804 |
2 replacement earth test spikes (200mm, 80mm dia.) |
|
Catalog # 6220-806 |
4 replacement test leads (15m, 10m, 10m, 3m) |
|
Catalog # 6220-824 |
Calibration check box (25 ohm) |
|
Catalog # 6220-850 |
1 x Black crocodile clip |
|
Catalog # 6320-245 |
Professional ground testing kit (2 x 50m, 2 x 30m, 4 x auger stakes,
tape measure, in hard carry case. |
|
Catalog # 6280-375 |
Vehicle 12 volt socket charger (rechargeable models only) |
|
Catalog # 21500-072 |
'Getting down to earth' A Megger guide to earth testing. |
|
|
|
