|
Description
The MIT1020/2 CAT IV was designed specifically to assist with
testing and maintenance of high voltage electrical equipment. IEEE
43-2000 recommends the use of 10kV for motor windings rated above
12kV and the Megger MIT1020/2 facilitates this. The
case is incredibly rugged and easy to carry, being made of tough
polypropylene and achieving an ingress protection rating of IP65.
In addition, the model number is marked on both the top and side
of the case for ease of identification in stores or vehicles.
The instrument has a large easy to read backlit
LCD display making it equally suitable for use in both bright
sunlight and poorly lit environments. Information displayed
includes resistance, voltage, leakage current, capacitance,
battery status and time constant. In addition, the elapsed time of
the test is displayed constantly removing the need for a separate
timer.
|
|
The controls of the instrument are clear and
unambiguous and "quick start" guide is included in the lid of the
instrument removing the need to carry bulky manuals under site
conditions. The instrument is fitted with a guard terminal to
enhance accuracy. The guard test lead is included as standard with
the instrument.
To further enhance the flexibility of the
instrument the MIT1020/2 has the facility to set the test voltage
in steps from 50 volts to the maximum output voltage avoiding the expense of several
insulation resistance testers to meet your application needs.
The IR tester is designed to meet the highest
safety standards and meets the requirements of EN 61010. In
addition, the instrument measures the voltage at the terminals and
if this is above 50V then the instrument will display the high
voltage warning and inhibit testing. At the end of the test the
instrument will automatically discharge the energy transferred to
the equipment during the test phase. |
