 |
Model KEW6310-05
Power Quality Analyzer - 200 Amp |
|
|
|
|
Power Quality Analyzers |
|
 |
200 Amp Power
Quality Analyzer Features
- Measurements include: voltage, current, frequency, active
power, apparent power, reactive power, active energy, reactive
energy, active energy, power factor, power quality, i.e. sags
and swells, unbalanced, flicker and transients, and harmonics.
- Applicable to five wiring systems:
single phase 2-wire x 4 single phase 3-wire, three phase 3-wire
x 2 three phase 4-wire, and Scott wiring.
- Waveform and vector display.
- True RMS value can be displayed.
- Large color LCD screen.
- Recording interval can be set between 1 second and 1 hour.
- Internal non-volatile memory of 1MB.
- Storage data up to 1GB with compact flash card.
- Download data to PC through USB connection.
- Dual power supply: AC line voltage or battery operation.
- Conforms to EN 61010-1 CAT III 600V safety standard.
|
|
|
Specifications |
| Measurement |
Description |
| AC Voltage Range |
150.0V, 300.0V, 600.0V,1000V |
| AC Voltage Accuracy |
±0.2% of
reading ±0.1% of full scale |
| AC Current Range |
200.0 Amps |
| AC Current Accuracy |
±0.2% of
reading ±0.1% of full scale + clamp accuracy |
| Active Power Accuracy |
±0.5% of
reading ±0.1% of full scale + clamp accuracy |
| Frequency Range |
40Hz to 70Hz |
| Effect of Power Factor |
±1% of reading, cos Ø = ±0.5 (Power
Factor = 1) |
| Recording Intervals |
Seconds |
| |
Minutes |
|
| 1, 2, 5, 10, 15, 20, 30 |
| 1, 2, 5, 10, 15, 20, 30, 60 |
|
|
|
|
|
|
|
KEW8126 Clamp Sensor Specifications |
|
AC Current Range |
200A |
|
Output Voltage |
0 to 500mV/200A (AC 2.5mV/A) |
|
Accuracy |
±0.5% of
reading ±0.1mV (50Hz to 60HZ) |
|
|
±1.0% of
reading ±0.2mV (40Hz to 1kHz) |
|
Frequency Response |
40Hz to 1kHz |
|
Conductor Size |
40mm diameter maximum |
|
Dimensions (device only) |
128mm (L) x 81mm (W) x 36mm (D) |
|
Weight |
260g |
|
|
|
|
|
|
General Specifications |
|
Display |
3.5 inch color LCD (320 x 240 dot matrix) |
|
AC Power Supply |
100 to 240V AC (50/60Hz) |
|
DC Battery Power |
6 x LR6 batteries |
|
Dimensions |
206mm (H) x 184mm (W) x 65mm (D) |
|
Weight |
800g including batteries |
|
|
|
|
|
|
Ordering Information |
|
Model KEW6310-03 |
Power Quality Analyzer, 1000 Amp |
|
|
|
|
|
|
Included Accessories |
|
 |
3 x Model KEW8126 clamp sensors.
1 x Test Lead Set (black, green, blue, red).
1 x USB Cable and PC Software.
6 x 'LR6' Batteries.
1 x Mains Power Cord.
1 x User's Manual.
1 x Carrying Case.
|
|
|
|
