Rapid-Tech Equipment
Power Supplies *NEW*
Multimeters
Oscilloscopes
Current Clamps
Electrical Testers
Extech
Fluke
Kyoritsu
Insulation Testers
Earth Testers
Power Analyzers
Milliohm Meters
Portable Appliance Testers
Automotive
Moisture Meters
Tachometers
Stroboscopes
Cable Locator
Sound Level Meters
Temperature & Humidity
Air Flow (Anemometers)
Light Meters
Water Quality
Data Cabling Testers
Calibrators
EMF/ELF Radiation Monitor


Other Stores

 
 

 

 

Back


    Kyoritsu 8031 $170.00

    Kyoritsu 8031
      Phase Indicator
      & Open Checker


      GST inclusive price for Australian Customers is AUD$187.00
      Remove from Cart Add to Cart

    Phase Indicator with open phase checker
    Phase indicator designed to check the presence of open phase and
    also the phase sequence by rotating disk and lamps.
    Can check a wide range of 3-phase power source from 110V to 600V.
    Operational Voltage 110~600V AC
    Time limit for continuous >500V: within 5 minutes
    Frequency Response 40~200Hz(AC 110~200V), 40~400Hz(AC 200~600V)
    Safety Standard
    IEC61010-1 CAT.III 600V Pollution Degree 2
    Withstand Voltage 2200V AC for 5 seconds
    Dimensions 106(L) × 75(W) × 40(D)mm
    Weight 350g approx.
    Cord 1.5m(R: red S: white T: blue)
    Accessories
    9029(Carrying Case)
    Instruction Manual



    Kyoritsu 4102A $650.00

    Kyoritsu 4102A
      Earth Tester


      GST inclusive price for Australian Customers is AUD$715.00
      Remove from Cart Add to Cart

    The latest circuit design permits the instrument to operate with the minimum of influence
    from earth voltage and earth resistance of auxiliary earth spikes.
    • Dust and drip proof. (designed to IEC 529 IP54)
    • Earth resistance value can be read directly from the scale.
    • Designed to meet IEC61010-1 safety standard.
    • Capable of measuring earth voltage.
    • Small and lightweight. Shock resistant new case material
    . • 2mA measuring current permits earth resistance tests without tripping
    earth leakage current breakers in the circuit under test.
    • Lead wire connection to C and P terminals and proper auxiliary earth resistance can be checked
    by "OK" lamp. Lead wire connection to C and E terminals is good when "OK" lamp is illuminated.

    Accessories
    >
    7095(Test Leads) × 1 set(red-20m, yellow-10m, green-5m)
    8032(Auxiliary earth spikes) × 1 set
    7121(Simplified measurement probe) × 1 set
    R6P(AA) Batteries × 6
    Neck strap
    Instruction Manual
    Carrying Case : 4102A(Soft Case) :



    Kyoritsu 4105A $760.00

    Kyoritsu 4105A
      Digital Earth Tester


      GST inclusive price for Australian Customers is AUD$836.00
      Remove from Cart Add to Cart

    Dust and drip proof.(designed to IEC 529 IP54)
    • In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accessories (unit can be hung from the neck for simplified measurement)
    • Designed to meet IEC61010-1 safety standard.
    • Capable of measuring earth voltage.
    • Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance
    • Small and lightweight. Shock resistant new case material.
    • 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test
    Accessories
    7095(Test Leads) × 1set(red-20m, yellow-10m, green-5m)
    8032 (Auxiliary earth spikes) × 1set
    7127( Simplified measurement probe) × 1 set
    R6P(AA) × 6
    Neck strap
    Instruction Manual
    Carrying Case : 4105A(Soft Case)