 |
 |
 |
|
Double insulated safety designed probe for ScopeMeter190 series. Each probe set includes 600 V CAT III / 1000 V CAT II rated 10:1 Voltage Probe, Hook Clip for Probe Tip, 4 mm Test Probe for Probe, Ground Lead with Hook Clip, Ground Lead with Mini Alligator, The red Probe Set also includes a 30 V CAT II rated Ground Spring for Probe Tip. Attenuation: 10x Bandwidth: 200 MHz Max. Input Voltage: 1000 V Max. Voltage to ground: 600 V CAT III 1000 V CAT II per IEC / EN61010-2-031 Input Resistance: 10 Mohm Input Capacitance: 14 pF Compensation range: 10 to 22 pF Cable Length: 1.2 m |
)
Double insulated safety designed probe for ScopeMeter190 series. Each probe set includes 600 V CAT III / 1000 V CAT II rated 10:1 Voltage Probe, Hook Clip for Probe Tip, 4-mm Test Probe for Probe, Ground Lead with Hook Clip, Ground Lead with Mini Alligator, The grey Probe Set also includes a 30 V CAT II rated Ground Spring for Probe Tip. Attenuation: 10x Bandwidth: 200 MHz Max. Input Voltage: 1000 V Max. Voltage to ground: 600 V CAT III 1000 V CAT II per IEC / EN61010-031 Input Resistance: 10 Mohm Input Capacitance: 14 pF Compensation range: 10 to 22 pF Cable Length: 1.2 m |
)
100MHz Oscilloscope probe with insulated BNC connector and switchable x10 & x1 attenuation. SPECIFICATION X10 Mode Attenuation Ratio: 10:1 Bandwidth: DC to 100MHz Rise Time: 3.5ns Input Resistance: 10 Megohm when used with oscilloscopes with 1Megohm input impedance Input Capacitance: Approx. 15 pF Compensation Range: 10 to 50 pF Working Voltage: 600V DC including peak AC de-rating with frequency X1 Mode Attenuation Ratio: 1:1 Bandwidth: DC to 15MHz Rise Time: 23.3ns Input Resistance: 1 Megohm (Oscilloscope input) Input Capacitance: 46 pF Plus Oscilloscope Capacitance Working Voltage: 600V DC incl. peal AC de-rating with frequency osition X 10 Cable Length: 1.2 Meters |
)
Set of two (one red, one gray) double insulated silicone shielded test leads for noise free measurements. Specially designed for use with the Fluke ScopeMeter 120 Series. Compatible with AC120 Alligator Clips and HC120 Hook Clips. Safety designed ground leads included. Integral strain relieve and extra hard probe tips provide extra long service life. Features safety designed shrouded plugs and notched tip to prevent probe from sliding. Length: 1.2m Bandwidth: 12,5 MHz Maximum Signal Voltage: 600V rms. CAT III per IEC 1010-2-031 Maximum Voltage to Ground: 600V rms. CAT III per IEC 1010-2-031 Maximum Current: 1A |
)
Ni-Cad battery pack designed for use with the Fluke ScopeMeter 120 Series and Fluke-43B Power Quality Analyzer. The battery pack has to be charged in the instrument. Performing refresh cycles on a regular basis, as provided by the 120 Series ScopeMeter, will strongly contribute to the lifespan of the batteries. Nominal Voltage: 4.8V Capacity: 1800 mAh |
)
NiMH battery pack designed for use with the Fluke ScopeMeter 124 and 123 (Fluke 123 support BP130 from Rev 2.0 onwards, see Instrument documentation. BP130 does not support previous versions of Fluke 123). The battery pack can be charged in the instrument. Performing refresh cycles on a regular basis, as provided by the ScopeMeter 123 & 124, will strongly contribute to the lifespan of the batteries. Nominal Voltage: 4.8 V Capacity: 3000 mAh |
)
Provides power cord operation and charging for 90 and 120 series ScopeMeters Australia 240 V ± 10% Frequency 50 to 60 Hz ± 10% Output Voltage: 15 V Output Current: 300 mA max Output Plug: 5 mm power jack per DIN 45323 Power Consumption: 10 VA Max. Voltage to Ground: 600 V rms. CAT III per IEC 61010-31 |
)
Provides power cord operation and charging for ScopeMeter 190 Series ScopeMeters. Mains (Line Voltage): 230V ± 10% Frequency 50 - 60Hz ± 10% Output Voltage: 17.8V DC Output Power: 15W Power Consumption: 23.7VA Max. Voltage to Ground: 600V rms. CAT III per IEC 1010-1 |
)
Accessories Package, including: FlukeView ® Software for Windows. OC4USB Optically Isolated RS-232 Adapter/Cable ScopeMeter 120 Series Hard Carrying Case (black) One BB120 Adapter Dimensions case: W x H x D 40 x 34 x 12.0 cm 15.5 x 13.5 x 4.75 inches |
)
C190 Hard Carrying Case OC4USB Optically Isolated RS-232 Adapter/Cable SW90W/034E FlukeView ® Software for Windows. |
)
Connects the optical isolated serial to USB adapter Supports the Fluke 120 Series, 190 Series ScopeMeter and the 430 Series Power Quality analyzer Supports Windows XP/2000/Me/98 Second edition |
)
Safety designed female BNC to Shielded Banana Adapter for use with Fluke ScopeMeter 120 Series and Fluke-43B Power Quality Analyzer. Two adapters come in package. Maximum Signal Voltage: 300V rms CAT III per IEC 1010-02-031 Maximum Voltage to Ground: 600V rms. CAT III per IEC 1010-2-031 |
)
The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MO in parallel with 6 pF. Input impedance between the inputs is 10 MO with a capacitance of 5 pF. Input: Probes with shrouded banana probe tip Probe length: 1.5 meter (60 inch) Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031 Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak) Output Cable: Safety designed 0.5m (5ft) BNC Cable Attenuation: 200x and 20x Bandwidth: DC to 20 MHz (-3 dB) Accuracy: ±2.5% Rise time: 17.5 ns CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB Battery type: Alkaline 9 volt, NEDA, IEC6LR61 Battery life: 8-hour operation, 400-hour stand by Power Adapter: PM 8907/80n (optional) Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips |
)
Designed for use with Fluke ScopeMeter 123. The probe connects to the optical port of the ScopeMeter 123, and features isolated external triggering, for measurements that require external triggering or triggering on floating reference signals. Probe length is 1.2m (48 inch). The probe includes a hookclip with ground lead, and a 9-Volt Alkaline battery. Input impedance is 10MO in parallel with 15pF. Trigger level: TTL compatible (High = 2V, Low = 0.8V) Minimum pulsewidth: 7 µs Maximum frequency: 50 kHz Maximum signal voltage: 600 Vrms, CAT II per IEC1010-2-031 Maximum voltage to ground: 600 Vrms, CAT II per IEC1010-2-031 Input resistance: 10 MW ±10 kW Battery type: Alkaline 9 volt, NEDA, IEC6LR61 Battery life: 60 hours |
)