 |
 |
 |
|
Waterproof ExStik® pH Meter Patent Pending Built-in Smart chip offers advanced functions and features to a stick style pH meter not found anywhere else The only stick style meter with: RENEW feature that tells you when it’s time to replace your pH electrode CAL feature that tells you when it’s time to recalibrate your meter Flat Surface pH electrode that is completely waterproof and rugged enough to withstand harsh environments Analog bargraph originates at neutral point (pH 7.00) to conveniently view trends in acidity or alkalinity ATC plus measures Temperature 1, 2 or 3 point calibration |
)
Waterproof Refillable ExStik® pH Meter Patent Pending Rugged refillable pH electrode that can be reused by refilling the reference solution once it depletes Obtains continuous high accuracy using fresh reference solution Fast and easy steps to refill your electrode Eliminates the concern of electrode shelf life The ONLY Stick style pH Meter with: Refillable pH electrode Fresh reference solution maintains high accuracy & eliminates concern with shelf life Measures pH in liquids, semi-solids, and solids Has renew indicator that tells you it's time to refill your electrode Eliminates guesswork CAL alert that tells you it's time to recalibrate to ensures accuracy Memory records and recalls 15 sequentially tagged readings that allows detection of changes over time Analog bargraph displayed on LCD Shows trends in acidity or alkalinity Additional Features/Functions: 1, 2 or 3 point calibration automatically recognizes buffer solutions Automatic Temperature Compensation Simultaneous display of pH and Temperature Display indicates when the reading is stabilized Data Hold, Auto power off and low battery indication Waterproof design floats in water and protects the meter in wet environment Interchangeable electrodes give you the versatility to change electrodes Download PH110 Data Sheet (PDF 55Kbytes) |
)
Extech CL200 ExStik® Waterproof Chlorine Meter Direct reading of Total Chlorine down to 0.01ppm & is unaffected by color/turbidity of the sample Direct reading of Total Chlorine provides fast and easy measurements (less than a minute) Low detection limit down to 0.01ppm Wide dynamic range of measurement up to 10ppm Unaffected by sample color or turbidity Automatic electronic calibration Memory stores, tags and recalls up to 15 readings Unique flat surface chlorine electrode eliminates any concerns for clogged junctions or glass breakage The state of the art LCD simultaneously displays ppm of Total Chlorine and Temperature plus analog bargraph indicator Complete with meter and flat surface Chlorine electrode, ExTab® reagent tablets (50 tests), protective sensor cap, sample cup with cap, four SR44 button batteries, and 48" (1.2m) neckstrap Download CL200 Data Sheet (PDF 60Kbytes) |
)
Extech EC500 Waterproof ExStik® II pH/Conductivity Meter Combination rugged flat surface pH electrode with autoranging high accuracy Conductivity cell Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode 9 units of measure: pH, µS, mS, ppm, ppt, mg/L, g/L, °C, °F Analogue bargraph indicates trends Memory stores up to 25 labeled readings Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio RENEW feature alerts user when electrode needs replacement Auto power off and low battery indicator Waterproof to IP67 EC500 meter includes electrode, protective sensor cap, sample cup with cap, four 1.5V SR44W batteries, and 48" (1.2m) neckstrap Download EC500 Data Sheet (PDF 90Kbytes) |
)
Waterproof ExStik Conductivity/TDS/Salinity Meter One high accuracy multi-range sensor measures four parameters (Conductivity, TDS, Salinity and Temperature) Autoranging meter offers 3 ranges to measure from pure water to salinity solution to waste, boiler and cooling water using the same conductivity cell 6 units of measure: µS/cm, mS/cm, ppm, ppt, mg/L, and g/L Internal memory stores up to 15 labeled readings for easy recall Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 Self calibration on power up |
)
Extech DO600 Waterproof ExStik® II Dissolved Oxygen Meter Easy to replace screw on membrane cap with optional extension cables Oxygen level displayed as % Saturation from 0 to 200.0% or Concentration from 0 to 20.00ppm (mg/L) Adjustable Altitude Compensation (0-20,000ft in 1,000ft increments) Adjustable Salinity Compensation from 0 to 50ppt Analogue bargraph indicates trends Memory stores up to 25 data sets with DO and Temperature reading Self calibration on power up Data Hold, Auto power off, Low battery indicator Waterproof to IP67 Optional 3 ft (1m) or 16ft (5m) extension cable Download DO600 Data Sheet (PDF 88Kbytes) |
)
Rugged design Conductivity meter with 3 ranges plus RS-232 PC interface for Datalogging Features: Manual or Automatic Temperature Compensation Calibration adjust for cell Large 1.4" (36mm) LCD display Min/Max/Avg, Data Hold, and Auto Power off Built-in RS-232 PC interface with optional Data Acquisition Software and Datalogger Dual display of conductivity and temperature measurements Fast 0.8 second sampling time Optional serial cable and Windows compatible data acquisition software allows users to display and capture readings on a PC, set time intervals and alarms Optional battery powered datalogger module stores up to 8000 readings which my be later transferred onto a PC Kit complete with 1K carbon cell on 39" (1m) cable, protective holster, 9V battery and hard vinyl protective carrying case Download 407303 Data Sheet (PDF 103Kbytes) |
)
Dual display of Oxygen concentration in solutions and Temperature — plus RS-232 PC interface Features: Super large 136mm LCD display Dual display of oxygen and temperature Measures dissolved oxygen from 0 to 20.0mg/L and 0 to 100.0% oxygen plus temperature from 32 to 122°F (0 to 50°C) Automatic Temperature Compensation from 0 to 50°C via temperature probe sensor built into polar graphic type oxygen probe Fast 0.8 second sampling time Recall Min/Max/Average readings Data Hold Built-in RS-232 PC serial interface with optional data acquisition software and datalogger Auto power off saves battery life Kit complete with 0.8"(20mm) diameter probe on 44" (1.1m) cable, 5 membranes, rubber holster, 9V battery and hard vinyl carrying case Optional Windows® Data Acquisition Software and serial cable enable user to display and capture readings on a PC, and set time intervals and alarms Optional battery operated Datalogger module stores over 8000 readings for later transfer to a PC Download 407510 Data Sheet (PDF 165Kbytes) |
)
Heavy Duty pH/mV/Temp Meter Dual display for pH or mV and Temperature Degrees C/F switchable Easy 2 point Slope and Calibration adjustments at pH 4 and pH 7 Min, Max, Avg. with Recall Manual and Automatic Temperature Compensation using temperature probe Optional serial cable and Data Acquisition Software Kit includes meter, pH electrode, temperature probe, protective holster, 9V battery, and carrying case Download 407228 Data Sheet (PDF 42Kbytes) |
)