|
 |
|
Gas Detectors
 |
| Detects Natural Gas and Propane/Butane |
| |
|
GST inclusive price for
Australian Customers is AUD$129.80 |
| |
| |
| |
|
Pocket-sized, lightweight flammable gas leak detector
- Detectable gases: Natural gas and Propane/Butane
- Conforms to the National and European guidelines, Cat. II, Class B
SPECIFICATIONS:
Operating Conditions: 14 to 120°F (-10 to 50°C); 95% RH or lower
Power Supply: 2 x 1.5V "AA" batteries
Battery Life: 4 hours of continuous use
Dimensions: 164 x 21mm
Weight: 0.88 oz (25g)
|
 |
| Detects Carbon Monoxide |
| |
|
GST inclusive price for
Australian Customers is AUD$385.00 |
| |
| |
| |
|
GAS DETECTOR, CARBON MONOXIDE
- Utilizes a stabilized electrochemical gas specific fast response sensor
- Audible alarm starts at 35ppm
- Backlit LCD display
- Max, Data hold and Auto shut off
- Includes carrying case and 9V battery
SPECIFICATIONS:
Range: 1 to 1000 ppm CO
Resolution: 1 ppm CO
Accuracy: ±5% or ±10 ppm, whichever is greater
Dimensions: 160 x 56 x 40mm
Weight: 6.4 oz (180g)
|
 |
| This unit detects a wide variety of gases |
| |
|
GST inclusive price for
Australian Customers is AUD$217.80 |
| |
| |
| |
|
GAS DETECTOR, COMBUSTIBLE
This unit detects a wide variety of gases including some toxic gases and nuisance vapors.
- Following is a partial list of the more common gases detected: natural gas; propane; butane; methane; acetone; alcohol; ammonia; steam; carbon monoxide; gasoline; jet fuel; hydrogen sulfide; smoke; industrial solvents; lacquer thinner; naphtha
- Audible & Visible Alarms
- Low power semi-conductor sensor
- Includes soft carrying case and batteries
SPECIFICATIONS:
Sensitivity: 50 ppm methane
Warm-up Time: Approx. 5 minutes
Response Time: less than 2 seconds
Alarm Limit: At 10% LEL for methane
Power Supply: 3 x "C" batteries
Battery Life: 8 hours of continuous use
Probe Length: 16"
|
 |
| Detects Refrigerant Gases |
| |
|
GST inclusive price for
Australian Customers is AUD$437.80 |
| |
| |
| |
|
Refrigerant Leak Detector: Detects and pinpoints even small leaks of refrigerant gases.
- Detects all halogenated refrigerants
- Audible and visual leak indications
- Microprocessor control with advanced digital signal processing
- Quickly and accurately mark any leak spot
- Semiconductor gas sensor
- Instantaneous response time
- No user calibration required
- Includes reference leak source and carrying case
SPECIFICATIONS:
Gases Sensed: CFCs: R11, R12, R13; HCFCs: R22, R502, R500; HFCs: R134a, R123, R125, R23, R404A, R407C, R410A & other halogen based compounds
Sensitivity: R22, 134a: Hi 6g/year, L: 30g/year; R404A, 407C, 410A: Hi 8g/year, L: 40g/year
Alarm Settings: Buzzer, Tricolour LED bar indicator
Sensor: Advanced ionization detection
Response Time: Less than 1 second
Warm-up Time: 10 seconds
Power Supply: Single 9V alkaline battery
Battery Life: Approx. 16 hours continuous use
Probe: 390mm flexible stainless probe
Dimensions: 18.5 x 8.5 x 3.4 cm
Weight: 18 oz. (500 g)
|
 |
| Ultrasonic Leak Detector |
| |
|
GST inclusive price for
Australian Customers is AUD$682.00 |
| |
| |
| |
|
Ultrasonic Leak Detector
- Ideal for locating leaks generated by pressure, vacuum, water, gas or air
- Complete with Ultrasonic Leakage Detector, Ultrasonic Transmitter, rubber bottle plug with plastic tubing, 1/2 inch PVC pipe assembly for attaching to top of detector, 9V battery, and carrying case
- Leakage level is displayed by an LED bargraph and audible signal
- Ultrasonic Transmitter sends a 40 kHz signal which, when detected by the meter, indicates the location and magnitude of a leak
- Crystal time and oscillator circuit
Specifications
Detector Frequency Response: 20 to 100 kHz
Transmitter Frequency: 40 kHz
|
|
