GST inclusive price for Australian Customers is AUD$1,094.50
5MHz Dual Channel Multiscope
Oscilloscope and Autoranging True RMS Digital MultiMeter
Easy to Use Menu Driven Operation
Internal or External Triggering
Auto or Manual Setup for Horizontal and Vertical Scaling
Single Shot Mode
Window Freeze Locks Waveform in the Display
Roll Mode for Slow Repetition Waveforms
Store and Recall Up to 16 Waveforms and Setups
Sampling Time: 25MS/s Dual Channel; 50MS/s Single Channel
132 x 128 Pixel Super-Twist Two Level Backlit Display
Data Hold and Low Battery Indication
Multimeter Functions Include AC/DC Voltage, Resistance, Continuity,
Frequency and RPM, Pulse Width, and % Duty Cycle for automotive use.
GST inclusive price for Australian Customers is AUD$874.50
100kHz Mini Multiscope Compact meter with higher graphical resolution
and adjustable trigger level >
Oscilloscope graphical functions: Single channel, volts/division (75mV to 500V), Amps/Division (75mA to 15A), 500ns Glitch Capture
High sensitivity allows user to capture low level signals
Oscilloscope Bandwidth: DC to 100kHz with a sample rate of 1 Million Samples/sec
Graphical display of mV, Volts, mA, Amps
Comparator function with user defined MIN/MAX levels allows the user to perform HIGH/LOW/PASS tests in Voltage, Current, Resistance and Capacitance modes
DMM functions: AC/DC Voltage/Current, Resistance, Frequency, Capacitance, dB, Duty Cycle, Pulse Width, Period, Logic Signal, Diode & Continuity tests Features
Oscilloscope graphical functions:
Single channel, volts/division (75mV to 500V), Amps/Division (75mA to 15A), 500ns Glitch Capture
High sensitivity allows user to capture low level signals
Oscilloscope Bandwidth: DC to 100kHz
with a sample rate of 1 Million Samples/sec
Graphical display of mV, Volts, mA, Amps
Oscilloscope Display: 128 x 64 pixel
graphic LCD ( View area 2.8x1.5")
Adjustable trigger level and slope allows
user to observe more complex waveforms
MultiMeter Display: 3-3/4 digit (4000 count)
LCD with Bargraph and Data Hold
Comparator function with user defined MIN/MAX levels
allows the user to perform HIGH/LOW/PASS tests in
Voltage, Current, Resistance and Capacitance modes
Logic test function for TTL & CMOS (5V & 3V)
DMM functions: AC/DC Voltage/Current, Resistance,
Frequency, Capacitance, dB, Duty Cycle, Pulse Width,
Period, Logic Signal, Diode & Continuity tests
Record and Recall MIN/MAX/AVG readings with time stamping
Overrange indication and Auto power off
Store and recall 15 waveforms
Generator output provides 10Hz to 20kHz Logic Level Output
Complete with rubber holster, built-in stand, fuses,
test leads, alligator clips and six AA batteries