Rapid-Tech Equipment
Air Flow (Anemometers)
Automotive
Cable Locator
Calibrators
Current Clamps
Data Cabling Testers
Distance Meters
Electrical Testers
EMF/ELF Radiation Monitor
Force Gauges
Gas Detectors
Insulation Testers
Light Meters
Microwave Detectors
Moisture Meters
Multimeters
Fluke Multimeters
Reed Multimeters
Amprobe/Meterman
Extech
Yokogawa
Oscilloscopes
pH Meters
Portable Appliance Testers
Sound Level Meters
Tachometers
Temperature & Humidity
Water Quality

 

 

 
Back
Yokogawa Multimeters
Choose from the selection on the left


    Yokogawa
    733-03     		$365.00

    Yokogawa 733-03
      Our BEST Value in True RMS Multimeters


      AUD$401.50 inc GST for Australian Customers

      Remove from Cart Add to Cart

    Developed for the Electrical Maintenance Engineer
     The True RMS Yokogawa 733-03 was developed with field use in mind it will make the measurements you need when you need to
    make it.
    Features
     DC Volts to 1000V, 0.2% basic accuracy
    AC Volts to 1000V, 0.5% basic accuracy
    Selectable True RMS or Mean readings (check sine distortion)
    Audible "over-voltage" Alarm,
    DC Current to 10A, AC Current to 10A
    Resistance to 40 Megohm, Continuity, Capacitance to 1000µF
    Frequency to 100kHz
    Shutters interlocked with selector switch prevents the wrong insertion of test leads protecting the meter & the user
    Auto Hold function
    Zero Calibration function of stray capacitance when checking capacitors.

    Cat II 1000V and Cat III 600V



    Yokogawa TY720 $695.00

    Yokogawa TY720

      Remove from Cart Add to Cart

    The TY720 true RMS meter has a dual 5 digit, 7 segment, 50 000 count LCD with a 51 segment bar graph. The basic accuracy is 0.02 per cent and the meter measures voltage, current, resistance, low resistance, frequency, duty cycle, temperature, capacitance, decibel calculation and have many other features.

    FEATURES
  • High Precision.
  • Basic accuracy 0.020%.
  • True RMS measurement.
  • Simultaneous measurement and display of DC and AC.
  • Switchable RMS/MEAN detection.
  • Low-pass Filter (LPF).
  • AC measurement has a 50mV range.
  • Low-Power resistance measurement.
  • Full support for Data Management.
  • Large-capacity logging-mode memory (10,000 data points).
  • USB communication, applicable software
  • (Optional DMM communication package).
  • Safety shutters for preventing erroneous insertion of test leads into current
  • measurement terminals.
  • Closed Case Calibration.
  • 3-year Warranty.

    SPECIFICATIONS:
    DCV : 0.02% + 5 50.000 mV to 1000.0 V
    ACV:RMS : 0.4% + 30, 50.000 mV to 1000.0 V
    ACV:MEAN : 1.0% + 30, 50.000 mV to 1000.0 V
    DCV+ACV : 0.5% + 10, 5.000 V to 1000 V
    DCA : 0.2% + 2, 500.00 µA to 10.000 A
    ACA:RMS : 0.75% + 20, 500.00 µA to 10.000 A
    ACA:MEAN : 1.5% + 20, 500.00 µA to 10.000 A
    DCA+ACA : 1.0% + 10, 500.00 µA to 10.000 A
    Continuity Check : Buzzer Sounds at 100 ± 50 ohms or less, Range:500.0 ohms
    Resistance : 0.05% + 2, 500.00 ohms to 50.000 Megohms
    LOW-power Resistance : 0.2% + 3, 5.000 kO to 5.000 M
    Diode Test : 1.0% + 2, 2.4000 V
    Temp.? : 1.0% + 1.5 deg.C, -200 to 1372 degrees C
    Capacitance : 1.0% + 5, 5.000 nF to 50.00 mF
    Frequency : 0.02% + 1, 2.000 Hz to 99.99 kHz
    Duty Cycle : ±1%, 10 to 90%