Features

• Can measure leakage currents of 1mA, which is useful for checking the insulation of low-voltage circuits and electrical components.

• Can measure a broad range of currents from leakage currents (at a resolution of 0.001 mA) to load currents up to 60A.

• Typical influence (on the current value of an adjacent cable) from an external magnetic field is 0.0005%.

• Filter function can cut off the harmonics - current components from 2nd order (for 30032A only).

• The design of the clamp lever enables smooth opening/closing of the clamp even for thick cables of 40mm in diameter.

• Approved for conformity to safety standards EN61010-1, EN61010-2-032 (CAT III 300V, pollution degree 2).

Parameter

Specification

Method of detection

Mean Value Detection and RMS-Value Calibration

Display

LCD (Digital display:3200 counts)
LCD (Bar-graph display: 32 segments)

Range Switching

Auto or manual range selection

Data Hold

On all ranges

Ambient Temperature and Humidity

0 to 50°C
80% RH or less (no condensation)

Temperature Coefficient

The following values must be added in the temperature range of either 30031A or 310032A
0 to 18°C or 28 to 50°
0<1<50.0A: ±(0.08% of reading/°C + 0.5 digits/°C)
50.0<1<60.6A: ±(0.3% of reading/°C + 0.5 digits/°C)

Influence of External Magnetic Field

0.0005% typical 1 (on current value of adjacent cable or wires)

Safety Standard

EN61010-1, EN61010-2-032 (CAT III 300V)

Circuit Voltage

300Vrms or less

Withstanding Voltage

3.7kV AC for one minute

Power Supply

One CR2032 (Coin-shaped) 3V battery

Battery Life

Approx. 90 hours (continuous)

Auto Power Off

Approx. 10 minutes after the last switch operation

Diameter of Measurable Conductor

40mm maximum

Dimensions

Approx. 70mm (W) x 179mm (H) x 25mm (D)

Weight

Approx. 200g

Accessories

User manual, Battery and soft Carrying Case