|
|
 |
TY710 Digital Multimeter |
|
|
|
|
 |
Details
- High Precision.
- Basic accuracy 0.020%.
- True RMS measurement.
- Simultaneous measurement and display of DC and AC.
- Full support for Data Management.
- Large-capacity logging-mode memory (1000 data points).
- USB communication, applicable software
(Optional DMM communication package).
- Safety shutters for preventing erroneous insertion of test
leads into current measurement terminals.
- Closed Case Calibration.
- 3-year Warranty.
Standard Accessories (included)
- Four type 'AA' (R6) dry cells, test lead set #98015,
440mA/1000V and 10A/1000V fuses (installed), and instruction
manual.
|
|
|
Accuracy Specifications |
|
Measurement |
Range |
Accuracy |
|
DC Volts |
50.000mV to 1000.0V |
0.02% + 5 digits |
|
AC Volts (RMS) |
50.000mV to 1000.0V |
0.7% + 30 digits |
|
DCV + ACV |
5.000V to 1000V |
1.0% + 10 digits |
|
DC Current |
500.00µA to
10.000A |
0.2% + 2 digits |
|
AC Current (RMS) |
500.00µA to
10.000A |
1.0% + 10 digits |
|
DCA + ACA |
500.00µA to
10.000A |
1.5% + 10 digits |
|
Continuity Check |
buzzer sounds
at 100Ω ±50Ω or less Range:
500.0Ω |
|
Resistance |
500.00Ω to
50.000 MΩ |
0.1% + 2 digit |
|
Diode Test |
2.4000V |
1.0% + 2 digits |
|
Temperature Note1 |
-200°C to
1372°C |
1.0% + 1.5°C |
|
Capacitance |
5.000nF to
5000mF |
1.0% + 5 digits |
|
Frequency |
2.000 Hz to 99.99 kHz |
0.02% + 1 digit |
|
Duty Cycle |
10% to 90% |
±1% |
|
| |
|
Note1: |
Temperature Probe: Type 'K'
Thermocouple sensor (optional) |
|
|
|
|
|
|
General Specifications |
|
Measurement Functions: |
DC voltage, AC voltage, DCV + ACV,
DC current, AC current, DCA +ACA, resistance, frequency,
temperature, capacitance, continuity check, diode test, duty
cycle, decibel calculation, and Low-pass filter. |
|
Additional Functions: |
Range hold,
maximum/minimum/average values, resistance and capacitance
zero, relative and percentage value calculation, manual mode
memory, logging-mode memory, auto power off and backlight
(white LED). |
|
Display: |
5-digit LCD: 7-segment
Digital display: Main display 50,000 counts, Sub display:
(50,000 counts)
Bar graph display: 51 segment
Polarity indicator: "-" appears automatically when the
polarity is negative
Overrange indicator: "OL" appears |
|
Measuring Rate: |
Instrument: 6 times/sec
Frequency: 1 time/sec
Capacitance: max. 0.03 times/sec (50mF)
Resistance: 4 times/sec
Bar graph display: 15 times/sec |
|
Operating Temperature: |
-20°C to
55°C; 80% RH or less (no condensation)
40°C to 55°C; 70% RH or less
|
|
Storage Temperature: |
-40°C to
70°C; 70% RH or less (no condensation) |
|
Temperature coefficient: |
Add the accuracy 0.05/°C
to the basic accuracy at a temperature within
-20°C to 18°C and 28°C
to 55°C |
|
Power Supply: |
Four type "AA" (R6) dry cells |
|
Battery Life: |
Approx. 120 hours (for continuous
DC voltage measurement with Alkaline cells) |
|
Withstanding Voltage: |
6.88kV for 5 seconds (between
input terminals and casing) |
|
Compliance/Standards: |
Safety EN61010-1, EN61010-031,
1000V CAT III, 600V CAT IV,
pollution level 2, 2000m max. above sea level
EMC: EN61326-1 Class B, EN55011 Class B Group 1 |
|
Dimensions: |
Approx. 90mm (W) x 192mm (H) x
49mm (D) |
|
Weight: |
Approx. 560g (including batteries) |
|
|
|
|
