|
Model |
Suffix Codes |
Description |
|
760301 |
|
WT3000 1 input element model |
|
760302 |
|
WT3000 2 input elements model |
|
760303 |
|
WT3000 3 input elements model |
|
760304 |
|
WT3000 4 input elements model |
|
Element Number
|
-01 |
30 Amp Input Element |
for model 760301 |
|
-02 |
for model 760302 |
|
-03 |
for model 760303 |
|
-04 |
for model 760304 |
|
-10 |
2 Amp Input Element |
for model 760301 |
|
-20 |
for model 760302 |
|
-30 |
for model 760303 |
|
-40 |
for model 760304 |
|
Version |
-SW |
Standard Version |
|
Power Cord |
-MV |
Motor Version |
|
-M |
UL/CSA standard |
|
|
/G6 |
Advanced computation
(IEC standard testing*, harmonic FFT, waveform
computation) |
|
|
/B5 |
Built-in printer |
|
|
/DT |
Delta calculation |
|
|
/FQ |
Add-on frequency measurement |
|
|
/DA |
20 Channel D/A output |
|
|
/V1 |
VGA output |
|
|
|
Serial interface (RS-232) |
|
|
USB port (PC) |
|
|
/C5 |
USB port (Peripheral) |
|
|
/C7 |
Ethernet function |
|
|
/CC |
Cycle by Cycle |
|
|
/FL |
Voltage Fluctuation, Flicker |
|
| |
|
Note:* /G6
option requires #761922 software |
|
Note: Mixing
of the 30A and 2A input elements is not supported, whether
purchasing a new unit or re-working an existing one. Also, the unit
cannot be modified to change the current range. Adding input modules
after initial product delivery will require re-work at the factory.
Please choose your models and configuration carefully. |
|
|
|
Standard Accessories |
|
Items included with WT3000 Instrument, Power cord, Spare power fuse,
Rubber feet, Current input protective cover, User's manual, Expanded
user's manual, Communication interface user's manual, Printer roll
paper (provided only with option /B5), Connector (provided only with
option /DA), Safety terminal adapter #758931 (provided two adapters
in a set times input element number).
|
|
Note: Cable B9284LK (light blue) for external current
sensor input is sold separately. Safety terminal adapter
#758931 is included with WT3000. Other cables and adapters
must be purchased by the user. |
 |
|
|
Application Software
|
|
Model |
Product |
Description |
Order Qty |
|
760122 |
WTViewer Software |
Standard-compliant measurement |
1 |
|
761922 |
Harmonic/Voltage
fluctuation/Flicker Measurement Software |
Standard-compliant measurement |
1 |
|
| |
| |
|
Rack Mounts and Hardware
|
|
Model |
Product |
Description |
|
751535-E4 |
Rack mounting kit |
For EIA |
|
751535-J4 |
Rack mounting kit |
For JIS |
|
701960 |
Compact mount |
500mm (W) x 560mm (D) x 705mm (H) |
|
701960/A |
|
Key board and mouse table |
|
701961 |
Deluxe mount |
570mm (W) x 580mm (D) x 839mm (H) |
|
701961/A |
|
Key board and mouse table |
|
701962 |
General-purpose mount |
467mm (W) x 693mm (D) x 713mm (H) |
|
| |
| |
|
|
Accessories (Sold separately)
|
| Model |
Product |
Description |
|
758971 |
Test lead set |
A set of 0.8m long, red and black
test leads. |
|
758922 Note 1. |
Small alligator clip |
Rated at 300V and used in a pair |
|
758929 Note 1. |
Large alligator clip |
Rated at 1000V and used in a pair |
|
758923 |
Safety terminal adapter |
(single-hold type) two adapters to
a set |
|
758931 |
Safety terminal adapter |
(screw-fastened type) Two adapters
to a set. 1.5mm hex Wrench is attached. |
|
758924 Note 1. |
BNC to banana jack |
Conversion adapter BNC to banana
jack (female) |
|
366924 Note 1, 2 |
BNC to BNC cable |
length 1m |
|
366925 Note 1, 2 |
BNC to BNC cable |
length 2m |
|
758921 Note 1. |
Fork terminal adapter |
Banana-fork adapter. Two adapters
to a set |
|
B9284LK Note 1. |
External sensor cable |
Current sensor input connector.
Length 0.5m |
|
B9316FX Note
1. |
Printer roll paper |
Thermal paper, 10 meters (1 roll) |
|
701959 |
Safety mini-clip |
Hook type (two in a set) |
|
| |
|
Note 1: Due to the nature of this
product, it is possible to touch its metal parts. Therefore, there
is a risk of electric shock, so the product must be used with
caution.
|
|
Note 2: Use these products with
low-voltage circuits (42V or less) |
|
|
| |
|
Current Sensor Unit
|
| Model |
Suffix Codes |
Description |
|
751521 |
|
Single-phase |
DC to 100 kHz (-3dB), -600A to 0A
to + 600A(DC), Basic accuracy (0.05% of reading + 40mA.
Superior noise withstanding ability and CMRR characteristic
due to optimized casing design. |
|
751523 |
-10 |
Three-phase U, V |
|
-20 |
Three-phase U, W |
|
-30 |
Three-phase U, V, W |
|
Supply Voltage |
-1 |
100V AC (50/60Hz) |
|
-3 |
115V AC(50/60Hz) |
|
-7 |
230V AC(50/60Hz) |
|
Power Cord |
-D |
UL/CSA standard |
|
-F |
VDE standard |
|
-R |
SAA standard |
|
-J |
BS standard |
|
-H |
GB standard |
|
| |
|
Note:
#751523-10 is designed for WT3000, PZ4000 and WT1600.
#751523-20 is designed for the WT2000 and WT200 Series.
#751521 and 751523 do not conform to CE Marking. |
| |
| |
|
Clamp-On Probe/Current
Transducer
|
|
Model |
Product |
Description |
|
751552 |
Clamp-On Probe |
30Hz to 5kHz, 1400Amps pk
(1000Arms) |
|
751574 |
Current transducer |
DC to 100kHz (-3dB), 600 Amps pk |
|
