|
GP-IB Communication (/C1)
GP-IB communication enables you to control the WT500 or transfer
data from a PC.
|
|
Ethernet Communication (/C7)
Data can be transferred via Ethernet* communication.
It enables file transfers using an FTP server.
Note*
100BASE-TX
|
|
 |
| |
|
External Current Sensor Input (/EX1, /EX2, /EX3)
Current can be measured by using current clamps
without disconnecting power supply wiring (voltage output type).
By setting an external current sensor conversion ratio, it can
support various types of current clamp-on probes.
|
|
VGA Output (/V1)
By connecting to a monitor, you can create large
displays of numerical values and waveforms. This function is
convenient for simultaneously confirming data on multiple
monitors, or to check data remotely.
|
|
Harmonic Measurement (/G5)
This function enables simultaneous measurement of
normal and harmonic data. Harmonic components of up to the 50th
order can be measured. With the WT500 you can simultaneously
confirm voltage, current, and the distortion factor (THD) as
well as measure the distortion factor without switching modes.
|
|
 |
 |
|
|
Harmonic Dual List |
THD
Measurement |
|
|
|
Delta
Computation (/DT)
This function allows you to
calculate individual phase voltages and phase currents from the
line voltages and phase currents measured in a three-phase,
three-wire (3P3W) system. The phase voltage can be calculated
from the line voltage measured with the three-phase, three-wire
(3V3A) method. This is useful when you want to determine the
phase voltage in a DUT with no neutral line by using the
three-phase, three-wire (3V3A) method.
Note:
This function cannot be installed on products with only one
element. |
|
Added Frequency Measurement (/FQ)
In addition to the standard
two channels of frequency measurement, an option is available
for frequency measurement on all channels. This option provides
frequency measurement of voltage and current on all channels
with input elements 1 through 3 installed. This is necessary
when you want to measure voltage and current frequency from the
instrument's I/O as well as voltage and current frequencies of
multiple items under test at the same time.
Note:
This function cannot be installed on products with only one
element. |
|
|
